1.1 This practice covers the mathematical processing of longitudinal profile measurements to produce a pedestrian pathway roughness statistic called the Pathway Roughness Index (PRI)....
Search Results "Measuring Technique"
Commonly Searched Documents
-
1. Scope
-
1014.2.1 Transfer Access
The camp shelter floor at the entrance is required to be 19 inches high maximum measured from the clear ground space....
-
11B-505.4 Height
A maximum height of 28 inches (710 mm) measured to the top of the gripping surface from the ramp surface or stair nosing is recommended for handrails designed for children....
-
11B-703.2.7 Character spacing
Character spacing shall be measured between the two closest points of adjacent raised characters within a message, excluding word spaces....
-
11B-505.4 Height
A maximum height of 28 inches (710 mm) measured to the top of the gripping surface from the ramp surface or stair nosing is recommended for handrails designed for children....
-
11B-703.2.7 Character spacing
Character spacing shall be measured between the two closest points of adjacent raised characters within a message, excluding word spaces....
-
1133A.2.1 Clear width
Kitchens shall have a minimum clear width measured between any cabinet, countertop or the face of any appliance (excluding handles and controls) that projects into the kitchen and the opposing...
-
11B-809.9.2 Clear width
Kitchens shall have a minimum clear width measured between any cabinet, work surface or the face of any appliance (excluding handles and controls) and the opposing cabinet, work surface,...
-
ASTM
ASTM F 1292 establishes a uniform means to measure and compare characteristics of surfacing materials to determine whether materials provide a safe surface under and around playground equipment...
-
Section 1630.2(j)(1)(v) Scientific, Medical, or Statistical Analysis Not Required, But Permissible When Appropriate
clinically diagnosed based in part on a disparity between an individual's aptitude and that individual's actual versus expected achievement, taking into account the person's chronological age, measured...
-
5.8.2.5 Toe Height Recommendation
5.8.2.5 Toe Height Recommendation The Committee recommends increasing the toe height to 18 inches minimum, measured above the ground when the top of the breast platform is 34 inches above...
-
Acceptable Trail Surfacing Requirements
These three criteria have not been defined adequately within the ADA Accessibility Guidelines for quantitative measurement on any specific surface....
-
Step 3: Apply the Accessibility Provisions
If the grade requirement can't be met because of a condition for an exception, measure and record the length of trail that will deviate from the technical requirement....
-
2.2.2.2 New York State Standards
Measurements shall be made in the center of the neckloop....
-
3.3.4 Clear Floor Length
The difference between the maximum length in the UDI and Seeger studies and the others is so great that they are probably due to the presence of unusually large people and/or devices, or measurement...
-
Station 3-Turning Radii
The extent of the lean, as measured from the perpendicular, is the lean angle....
-
4.3.5.1 90-Degree Turn
Findings from the Anthropometry of Wheeled Mobility Study indicate that a width of at least 85 cm (33 in.) was required for 50% of the manual and power wheelchair users measured in this...
-
Examination Tables
Treatment tables typically have a fixed height of 31 inches measured from the floor to the top of the table. The lower cost products have an open base with an H-brace or shelf....
-
M303.2.3 Wheelchair Spaces / Depth of Wheelchair Spaces for front or Rear Entry
(Figure 1 –Clear Platform showing the measurements of 32” wide x 40” inches length Rationale: Clear platform size of 32 inchesminimum width x 40 inches minimum length accommodates non-powered...
-
Observations and Results
Accessibility Measures During the 10-month period of the test, firmness and stability of the SEWF surfaces were measured with the rotational penetrometer (Figs. 12 and 13, respectively...
- ADA Checklist: Health Care Facilities and Service Providers
-
5.2.1.1 Transfer Surface Width Recommendations for M301
Inclusive Design and Environmental Access at the University of Buffalo, gave a presentation on the Wheeled Mobility Anthropometry Project (AWM Project).GG He provided a brief analysis of measurements...
-
B. Survey and Review of Polling Place Locations
each newly proposed polling place location to determine whether it is accessible to persons with disabilities or could be made accessible on Election Day through the use of the remedial measures...
-
The Target Population
If they were measured in proportion to their representation in the military, and then the product or workspace design were created to accommodate the 5th percentile through the 95th percentile...