The audible signal and verbal annunciator shall be 10 dB minimum above ambient, but shall not exceed 80 dB, measured at the hall call button. Exceptions: 1. Reserved. 2....
Search Results "Measuring Technique"
-
11B-407.2.2.3 Audible signals
-
11B-221.2.1.5 Stadium-style movie theaters
Located within the area of the theater in which the vertical viewing angles (as measured to the top of the screen) are from the 40th to the 100th percentile of vertical viewing angles for...
-
11B-407.2.2.3 Audible signals
The audible signal and verbal annunciator shall be 10 dB minimum above ambient, but shall not exceed 80 dB, measured at the hall call button. Exceptions: Reserved. Reserved....
-
11B-308.3.1 Unobstructed
Operable parts of fuel dispensers shall be permitted to be 54 inches (1372 mm) maximum measured from the surface of the vehicular way where fuel dispensers are installed on existing curbs...
-
11B-406.5.12 Detectable warnings
The detectable warning shall extend the full width of the curb ramp (exclusive of flared sides) and shall extend either the full depth of the curb ramp or 24 inches (610 mm) deep minimum measured...
-
Back Support
The Board has added clarification that the back support may be located up to 2 ½ inches from the rear edge of the seat, measured horizontally....
-
International Association of Assistance Dog Partners (IAADP)
New ideas, training techniques and methods, and resources are constantly becoming available....
-
Accessible Medical Equipment
Designated staff get annual training on safe transfer techniques. E.2....
-
Just Manufacturing Classroom Concealed Ledgemount Teardrop Handles Restricted Swing Faucet
Classroom faucets feature rigid spouts, or restricted swing spouts, providing preventative measures against wet counter tops in the classroom....
-
Just Manufacturing Concealed Classroom Faucet with High Rise Spout
Classroom faucets feature rigid spouts, or restricted swing spouts, providing preventative measures against wet counter tops in the classroom....
-
Seton Add-on Van Accessible Parking Sign
Discourage parking violations while complying with state laws Measures 12"W x 6"H Available in two color options: Blue with White print and White with Green print...
-
HEWI System Lignum Protect Handrails
A large selection of supports and end pieces can be combined to enable made to measure solutions....
-
Halsey Taylor Cane Touch Apron for HAC ADA Series
Note: Floor to underside measurements of cane apron equals 27" when mounted correctly....
-
Step 2: Identify the Presence of Limiting Factors
Construction Tip Choose a method to measure the running slope. There are a number of ways you can measure running slope....
-
4.3 Reach Ranges
We do not know how forward reach was measured in the UDI study....
-
308.3.1 Unobstructed
Operable parts of fuel dispensers shall be permitted to be 54 inches (1370 mm) maximum measured from the surface of the vehicular way where fuel dispensers are installed on existing curbs...
-
903.4 Back Support
Back support shall be 2 1/2 inches (64 mm) maximum from the rear edge of the seat measured horizontally. Advisory 903.4 Back Support....
-
H.2. - Does Section 508 apply to a Federal agency's existing EIT procured prior to June 21, 2001?
Although the amendments to Section 508 were effective on August 7, 1998, there were no standards to measure compliance until the standards published by the Access Board became effective...
-
Surcharges
against discrimination: (f) A public entity may not place a surcharge on a particular individual with a disability or any group of individuals with disabilities to cover the costs of measures...
-
§ 37.42(f)
Where the horizontal gap is more than 3 inches and/or the vertical gap is more than 5/8 inch, measured when the vehicle is at rest, the horizontal and vertical gaps between the car floor...
-
308.3.1 Unobstructed
Operable parts of fuel dispensers shall be permitted to be 54 inches (1370 mm) maximum measured from the surface of the vehicular way where fuel dispensers are installed on existing curbs...
-
308.3.1 Unobstructed
Operable parts of fuel dispensers shall be permitted to be 54 inches (1370 mm) maximum measured from the surface of the vehicular way where fuel dispensers are installed on existing curbs...
-
604.3.2 Overlap
complying with 606 shall be permitted on the rear wall 18 inches (455 mm) minimum from the water closet centerline where the clearance at the water closet is 66 inches (1675 mm) minimum measured...
-
FAQ: How do I upgrade my subscription?
Upgrading to a Premium or Accessibility Specialist level subscription will provide access to more Corada content such as selected state accessibility requirements, "how to measure" videos...
