met:    (a) the cabinetry can be removed without removal or replacement of the kitchen work surface;    (b) the finish floor extends under the cabinetry; and    (c) the walls...
Search Results "Head End Wall"
-
11B-804.3.1 Clear floor or ground space
-
1134A.8, Item 1
Vanities and lavatories shall be installed with the centerline of the fixture a minimum of 18 inches (457 mm) horizontally from an adjoining wall or fixture to allow for forward approach...
-
Intensity
Intensity To be effective, a visual signal (or its reflection from adjacent walls and ceiling) must be of an intensity that will raise the overall light level sharply, but not be so intense...
-
1134A.8, Item 1
Vanities and lavatories shall be installed with the centerline of the fixture a minimum of 18 inches (457 mm) horizontally from an adjoining wall or fixture to allow for forward approach...
-
11B-608.5.1 Reserved
In transfer type shower compartments, the controls, faucets, and shower spray unit shall be installed on the side wall opposite the seat 38 inches (965 mm) minimum and 48 inches (1220 mm...
-
804.2.1 Pass Through Kitchen
In pass through kitchens where counters, appliances or cabinets are on two opposing sides, or where counters, appliances or cabinets are opposite a parallel wall, clearance between all opposing...
-
Accessible Pathway & Corridor: Minimum Clear Width Required for 180-degree Turn Around Barrier
These data are based on measurements of wheeled mobility users performing 180-degree turns around an obstruction, built with mock walls....
-
Car Dimensions: ADA Standard Section 407.4.1
Section 407.4.1 covers the current ADA Standards for elevator car dimensions.
-
Kohler® Mazz Single-Handle Pull-Down Sprayer Kitchen Faucet in Vibrant Stainless
and makes adjusting water temperature easy High-arc gooseneck spout and 360-degree spout rotation offer superior clearance for filling pots and cleaning 2-function pull-down spray head...
-
Sloped Surfaces
Rest one end of the level at the highest point of the sloped surface and lift the other end (see image) until the bubble is in the middle of the tube. This is the "level" position....
-
Observations:
The wheelchair scale we used had a leveled surface of length 30 in. long with a bevel of 5 in. each at both ends (i.e., total length of 40 in.)....
-
Hitting the Gridiron, Old School Style: A Look at Retro Bowl
You take on the role of both general manager and head coach, guiding your chosen team through a season, making critical plays on the field, and managing your roster off it....
-
E2-a
[ADA Standards § 4.4.1]    Yes    No Note: These objects may be wall mounted or free standing....
-
11B-104.1.1 Construction and manufacturing tolerances
All dimensions are subject to conventional industry tolerances except where the requirement is stated as a range with specific minimum and maximum end points....
-
11B-104.1.1 Construction and manufacturing tolerances
All dimensions are subject to conventional industry tolerances except where the requirement is stated as a range with specific minimum and maximum end points....
-
704.4 Materials
Exterior walls shall be of materials permitted by the building type of construction....
-
Landscape Forms Inc. FLO 3 Section Bike Rack
May be embedded or surface mounted at ends Nylon glides cushion the surface contact point of 2 intermediate loops Refer to installation guide to meet APBP Guidelines for bike rack spacing...
-
AJW Architectural Products UJ14 Series UJ14A Hook Strip 26"L, 3 Hooks - Surface Mounted
Ends of strip are returned 1/2"to wall surface. Hooks: Fabricated of #14 gauge stainless steel finished to match strip....
-
1017.4 Passing Spaces
Where the full length of a trail does not fully comply with 1017, a passing space shall be located at the end of the trail segment that fully complies with 1017....
-
1017.4 Passing Spaces
Where the full length of a trail does not fully comply with 1017, a passing space shall be located at the end of the trail segment that fully complies with 1017....
-
1.1.6 Flatness of walk cross slope
Measure along two paths, each with the end of the digital inclinometer 1 ft (300 mm) from the edge of the path and placed toward the middle of the path. See Fig. 2....
-
11B-1004.1 Clear floor space
To optimize space use, designers should carefully consider layout options such as connecting ends of the row and center aisle spaces....
