Characters shall be selected from fonts where the width of the uppercase letter “O” is 60 percent minimum and 110 percent maximum of the height of the uppercase letter “I”. [2010...
Search Results "Seat Designation"
-
11B-703.5.4 Character proportions
-
11B-703.5.8 Character spacing
Character spacing shall be measured between the two closest points of adjacent characters, excluding word spaces. Spacing between individual characters shall be 10 percent minimum...
-
K3
In each eating area, if tables with fixed seats are provided, do at least 5% of each type of table with fixed seats have accessible locations with knee space at least 27 inches high, at...
-
Applying the Forest Service Trails Accessibility Guidelines
The trail has a "Designed Use" of "Hiker/Pedestrian" as defined in the Federal Trail Data Standards....
-
Section 1: Dwellings Subject to the New Construction Requirements of the Fair Housing Act.
The issues addressed in this section concern the types of multifamily dwellings (or portions of such dwellings) designed and constructed for first occupancy after March 13, 1991 that must...
-
Caroma® USA Invisi Series II Walvit Wall Hung Elongated Water Closet
Important: The Walvit InvisiTM II dual flush washdown toilet will comply with the Americans with Disabilities Act when installed to Easy Height Standards for Accessible Design, Section 4.16...
-
IHS Standards Store
Founded in 1959, IHS offers a broad base of engineering data from research and design to manufacturing and repair....
-
5.3.3 Transfer Sides Recommendations for M302
This provision will coincide with the seat area design of most examination chairs. NPRM Proposed Provision: M302.2.3 Transfer Sides....
-
B. Braille Signs
B. Do the wall mounted signs provided for the rooms listed above have Braille and raised letters so that they can be read by persons who are blind or have low vision? [ADA Stds....
-
Applying Accessibility Guidelines to Your Site
How did we end up with so many accessibility guidelines and standards? Which guidelines and standards apply to your site? The following information will demystify accessibility...
-
Important Tools for Accessible Recreation
The following tools work together with the accessibility guidelines when accessible recreation facilities and programs are being developed and managed.
-
1.1.6
1.1.6 Accessible surfaces should be as smooth as possible. This includes localized variations in slope as well as bumpiness created by small, individual units such as bricks,...
-
1010.1.9.7 Delayed egress locks
... 4. An attempt to egress shall initiate an irreversible process that shall allow such egress in not more than 15 seconds when a physical effort to exit is applied to the egress...
-
1010.1.9.8.1 Delayed egress locking system
The delayed egress locking system shall be installed and operated in accordance with all of the following: … 4. An attempt to egress shall initiate an irreversible process that...
-
UFAS vs. ADAAG Comparison - Assembly Seating
UFAS vs ADAAG - Assembly Seating Click here to view/download pdf version (36 KB) Capacity of Seating & (in) Assembly Areas Combined Standards...
-
Section 4. Application of the Guidelines
This section states that the design specifications that comprise the final Guidelines apply to all "covered multifamily dwellings" as defined in Section 2 of the Guidelines....
-
Purchase of multiple tickets. (Section-by-Section Analysis)
To preserve the availability of accessible seating for other individuals with disabilities, the Department has not expanded the rule beyond three additional contiguous seats....
-
§ 35.151(g)(2)
(2) Wheelchair and companion seating locations are not located on (or obstructed by) temporary platforms or other movable structures. ...
-
§ 35.151(g)(2)
(2) Assembly areas that are required to horizontally disperse wheelchair spaces and companion seats by section 221.2.3.1 of the 2010 Standards and have seating encircling, in whole or in...
-
11B-607.2 Clearance
Where a permanent seat is provided at the head end of the bathtub, the clearance shall extend 12 inches (305 mm) minimum beyond the wall at the head end of the bathtub....
-
11B-607.2 Clearance
Where a permanent seat is provided at the head end of the bathtub, the clearance shall extend 12 inches (305 mm) minimum beyond the wall at the head end of the bathtub....
-
Toilet Rooms-Special Exhibit Space
The force required to push or pull open the men's and women's toilet rooms designated as accessible is 10 lbf, which exceeds the maximum allowable door opening force of 5 lbf....
-
Whitehall Mfg. WH2125A On-Floor Bariatric Stainless Steel Toilet
This bariatric toilet is designed to be installed on a finished wall either from the front or in a rear (chase) application....
-
Findings
There were instances where the accessibility standards were not properly applied to the playground design. ...
