Clearances around water closets and in toilet compartments shall comply with 604.3.
Search Results "NFSI: National Floor Safety Institute"
Commonly Searched Documents
- 
    
  
  604.3 Clearance
  
- 
    
  
  A4.2 SPACE ALLOWANCES AND REACH RANGES
  [See subsections ...] 
- 
    
  
  604.3.1 Size
  Clearance around a water closet shall be 60 inches (1525 mm) minimum measured perpendicular from the side wall and 56 inches (1420 mm) minimum measured perpendicular from the rear... 
- 
    
  
  4.5.4 GRATINGS
  If gratings are located in walking surfaces, then they shall have spaces no greater than 1/2 in (13 mm) wide in one direction (see Fig. 8(g)). If gratings have elongated openings,... 
- 
    
  
  11B-407.4.7.1.5 Button spacing
  A minimum clear space of 3/8 inch (9.5 mm) or other suitable means of separation shall be provided between rows of control buttons. 
- 
    
  
  11B-604.3 Clearance
  11B-604.3 Clearance. Clearances around water closets and in toilet compartments shall comply with Section 11B-604.3. 
- 
    
  
  Water Closet Clearances
  The Department gave careful consideration to the costs and benefits of its adoption of the standards relating to water closet clearances in single-user toilet rooms. The primary... 
- 
    
  
  § 38.53(d) Coordination with boarding platform
  (d) Coordination with boarding platform— 
- 
    
  
  Section 810.5.3
  Section 810.5.3 This section concerns coordination between rail platforms and rail vehicles. The Department is adding language from the former §10.3.1 (9) (Exception 2), which... 
- 
    
  
  14) Carpet and carpet tile
  14) Carpet and carpet tile ADAAG: Same standards for carpet and carpet tile: maximum pile height of 1/2" (§4.5.3). UFAS: Carpet must have maximum pile height of 1/2". Carpet... 
- 
    
  
  11B-604.3 Clearance
  Clearances around water closets and in toilet compartments shall comply with Section 11B-604.3. 
- 
    
  
  11B-407.4.7.1.5 Button spacing
  A minimum clear space of 3/8 inch (9.5 mm) or other suitable means of separation shall be provided between rows of control buttons. 
- 
    
  
  11B-813.2.1.2 Clearance
  Floor or ground surfaces of clearances shall comply with Section 11B-302. Changes in level are not permitted.... 
- 
    
  
  10.2.1(2)
  or replaced bus shelters shall be installed or positioned so as to permit a wheelchair or mobility aid user to enter from the public way and to reach a location, having a minimum clear floor... 
- 
    
  
  11B-1002.6.1 Clear floor or ground space
  A clear floor or ground space complying with Section 11B-305 shall be provided in the load and unload area adjacent to the transfer device.... 
- 
    
  
  11B-1002.6.1 Clear floor or ground space
  A clear floor or ground space complying with Section 11B-305 shall be provided in the load and unload area adjacent to the transfer device.... 
- 
    
  
  11B-1002.6.1 Clear floor or ground space
  A clear floor or ground space complying with Section 11B-305 shall be provided in the load and unload area adjacent to the transfer device.... 
- 
    
  
  § 38.73(d)(1) Requirements
  the boarding platform or mini-high platform design so that the horizontal gap between a vehicle at rest and the platform shall be no greater than 3 inches and the height of the vehicle floor... 
- 
    
  
  Recessed Lavatories
  (If the clear floor space at the lavatory is obstructed on both sides more than 2 feet then it must be at least 36 inches wide instead of 30 inches.)... 
- 
    
  
  11B-305.6 Approach
  One full unobstructed side of the clear floor or ground space shall adjoin an accessible route or adjoin another clear floor or ground space. ... 
- 
    
  
  11B-305.6 Approach
  One full unobstructed side of the clear floor or ground space shall adjoin an accessible route or adjoin another clear floor or ground space. ... 
- 
    
  
  11B-305.6 Approach
  One full unobstructed side of the clear floor or ground space shall adjoin an accessible route or adjoin another clear floor or ground space.... 
- 
    
  
  407.4.6.1 Location
  Where the elevator panel serves more than 16 openings and a parallel approach is provided, buttons with floor designations shall be permitted to be 54 inches (1370 mm) maximum above the... 
