Published in the Federal Register on January 9, 2017. 36 CFR Part 1195 RIN 3014-AA40 Standards for Accessible Medical Diagnostic Equipment AGENCY: Architectural and...
Search Results "Adjusted Construction Cost"
-
36 CFR Part 1195 Standards for Accessible Medical Diagnostic Equipment - Preamble
-
M301.2.1 Height
The height of the transfer surface during patient transfer shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum measured from the floor to the top of the transfer...
-
Flange way gap
For rail projects, no flange way gap can be greater than 2.5" where passenger circulation paths cross tracks at grade (i.e. a street-level pedestrian crossing over streetcar tracks)....
-
Bosch 3-Point Self-Leveling Alignment Laser GPL 3
Description Three-point plumb and level point projection laser accurately transfers and aligns plumb up/down, front level and align points; accuracy is +/- 1/4 In. at 100 ft....
-
Bosch Five-Point Self-Leveling Alignment Laser GPL 5 S
Description The GPL 5S is a five-point laser that levels, plumbs up, plumbs down, and squares. It accurately transfers and aligns level, plumb and 90 degree square points. With...
-
Bosch 3 Point Self Leveling Alignment Laser Level GPL 3 S
Description The GPL3 offers limitless uses, everything from plumbing up floors and ceilings to installing drywall partitions and establishing benchmarks. And because it can be...
-
7. Support Costs
Support Costs The City will only charge incremental costs that the City will incur as a result of implementing the program, which would not otherwise be incurred if the program did not...
-
Midmark 625 Barrier-Free® Power Examination Table
Features include: Power height and back 650-pound patient weight capacity 18-inch to 37-inch seat height adjustment Unique Quick Exam® and Motion Profiling™ control features...
-
Standards Applicable Prior to March 15, 2012
use the 2010 Standards as adopted in the Title II regulations, except that Exception (1) in Section 206.2.3 does not apply, as an acceptable alternative accessibility standard for new construction...
-
Summary of Costs and Benefits
We estimated the additional costs under three scenarios....
-
Midmark 623 Barrier-Free® Power Examination Table
Features include: Power height and back 400-pound patient weight capacity 18-inch to 37-inch seat height adjustment Hand and foot control (standard) Receptacle and rear storage...
-
Evaluate and adjust the volume of the Walk indication
Evaluate and adjust the volume of the Walk indication Stand at the curb or end of the curb ramp at the crosswalk and listen for the Walk indication....
-
1011.1 General
This section contains the technical requirements for outdoor constructed features provided within camping facilities, picnic facilities, viewing areas, and trailheads or on trails....
-
Overview
Newly constructed and altered pools must meet these requirements. Public entities and public accommodations also have obligations with respect to existing pools....
-
Attorney’s Fees and Costs
Attorney’s Fees and Costs – The City shall pay Class Counsel $13.3 million as reasonable attorney’s fees and $1.7 million for costs and expenses, for a total of $15 million....
-
Accessibility Standards in Title II Regulations Issued by DOJ
The Title II regulations provide that design, construction, and alterations of facilities commenced after January 26, 1992, must be done in such a manner that the facility or part of the...
-
Magnuson Group UMEA Waste Receptacles
Constructed of painted steel and suitable for both indoors and outdoors, UMEA models can be 1, 2 or 3-compartments wide – each with selectable top inserts and corresponding front graphics...
-
LEGAL OPINION - U.S. DEPARTMENT OF TRANSPORTATION OFFICE of GENERAL COUNSEL on 49 CFR 37.43(a)
May 2016
-
§ 37.43(a)
(a)
-
Section 37.42 Service in an integrated setting to passengers at intercity, commuter, and high-speed rail station platforms constructed or altered after February 1, 2012
Section 37.42 Service in an integrated setting to passengers at intercity, commuter, and high-speed rail station platforms constructed or altered after February 1, 2012....
-
M305.2.8 Fittings
Transfer supports shall not rotate within their fittings when in place for transfer.
-
M305.2.7 Clearance
Clearance between the transfer support gripping surface and adjacent surfaces or obstructions shall be 1 ½ inches (38 mm) minimum.
-
M305.2.7 Clearance (Section-by-Section Analysis)
In the MDE NPRM, the Access Board did not provide any specific requirements for clearances around the transfer support. However, in the preamble to the MDE NPRM the Access Board...
-
M305.2.8 Fittings (Section-by-Section Analysis)
The MDE NPRM proposed to require that transfer supports not rotate in their fittings (proposed M305.2.3). Five commenters addressed this provision. Four of the commenters disagreed...
