Viewing areas in recreation settings must be located along an outdoor recreation access route that connects to the other major features at the site, including the parking area....
Search Results "RERC Rec-Tech: Rehabilitation Engineering Research Center on Recreational Technologies"
Commonly Searched Documents
-
Viewing Areas
- Reeve-Irvine Research Center
-
§301(7)(L)
A gymnasium, health spa, bowling alley, golf course, or other place of exercise or recreation....
- Disability and Employment Resources: SCVRD Part 1
-
1016.2 Surface
The surface of outdoor recreation access routes, passing spaces, and resting intervals shall be firm and stable....
-
1016.2 Surface
The surface of outdoor recreation access routes, passing spaces, and resting intervals shall be firm and stable....
-
1016.7.1 Maximum Running Slope and Segment Length
The running slope of any segment of an outdoor recreation access route shall not be steeper than 1:10 (10%). ...
-
1016.7.1 Maximum Running Slope and Segment Length
The running slope of any segment of an outdoor recreation access route shall not be steeper than 1:10 (10%)....
- Rawlinson MS VGO Robot
-
1016.2 Surface
This section requires the surface of outdoor recreation access routes, passing spaces, and resting intervals to be firm and stable....
-
1002.4.5 Ride Entry
Openings providing entry to wheelchair spaces on amusement rides shall be 32 inches (815 mm) minimum clear.
-
11B-1002.4.5 Ride entry
Openings providing entry to wheelchair spaces on amusement rides shall be 32 inches (813 mm) minimum clear.
-
1016.8 Resting Intervals
Resting intervals shall comply with 1016.8.
-
1016.8.1 Length
The resting interval length shall be 60 inches (1525 mm) long minimum.
-
Side Entry Openings, and Width and Length of Wheelchair Space
Side Entry Openings, and Width and Length of Wheelchair Space If the wheelchair space can only be entered from the side, the ride must be designed to permit sufficient turning...
-
Approach
Approach Turning space (60-inch diameter or T-shaped space) for a wheelchair must be provided where the accessible route adjoins the ride, so that riders can access the ride. One...
-
1002.4.5 Ride Entry
Openings providing entry to wheelchair spaces on amusement rides shall be 32 inches (815 mm) minimum clear.
-
Technical Requirements [1016]
[See subsections ...]
-
Cross Slope [1016.7.2]
Cross slope is the side-to-side slope of the surface of an ORAR. When the surface is constructed of concrete, asphalt, or boards, the cross slope must be no steeper than 1:48 (2...
-
1002.4.5 Ride Entry
1002.4.5 Ride Entry. Openings providing entry to wheelchair spaces on amusement rides shall be 32 inches (815 mm) minimum clear.
-
2.7 Tread Obstacles
Where tread obstacles exist on the surface of an ORAR, they shall not exceed 1 inch (25 mm) in height. Where the surface is paved or is elevated above the natural ground,...
-
3.1.3.3 Cross Slope of Driveways
The cross slope of driveways shall not exceed 1:33 (3 percent). Exception. The cross slope of driveways may be no more than 1:20 (5 percent) where needed to ensure proper...
-
3.2.2 ORARs in Camping Units
Connections shall be provided between site furnishings and constructed features in camping units as well as between accessible camping units, parking areas, and accessible common use...
-
3.1.3.2 Running Slope (Grade) of Driveways
The running slope of driveways shall be no more than 1:12 (8.33 percent) for no more than 50 feet (15 m). Exception 1. A running slope of up to 1:10 (10 percent) for driveways is...