Where gates or barriers are constructed to control access to an ORAR, gates and barriers shall comply with 2.10.
Search Results "RERC Rec-Tech: Rehabilitation Engineering Research Center on Recreational Technologies"
Filters
Commonly Searched Documents
-
2.10 Gates and Barriers
-
2.8 Openings
Openings in the surface of ORARs shall be small enough to prevent passage of a 1/2 inch (13 mm) diameter sphere. Where possible, elongated openings should be placed...
-
F244.5.4 Location
Outdoor recreation access routes required by F244.5.2 and F244.5.3 shall coincide with or be located in the same area as general circulation paths. Advisory F244.5.4 Location....
-
C205.1 General
EXCEPTION: Software that is assistive technology and that supports the accessibility services of the platform shall not be required to conform to the requirements in Chapter 5....
-
Slope: ADA Standard Section 1002.4.2
The floor or ground surface of wheelchair spaces shall have a slope not steeper than 1:48 when in the load and unload position.
-
Minimum Number: ADA Standard Section 234.3
Section 234.3 covers scoping requirements in the current ADA Standards for the minimum number of wheelchair spaces required at amusement rides.
-
11B-234.3 Minimum number
Amusement rides shall provide at least one wheelchair space complying with Section 11B-1002.4, or at least one amusement ride seat designed for transfer complying with Section...
-
11B-1002.4.2 Slope
The floor or ground surface of wheelchair spaces shall have a slope not steeper than 1:48 when in the load and unload position.
-
Acceptable SEWF Systems
Because of their reactivity, the stabilizing binders needed to be applied on site or mixed with EWF no longer than 1 h prior to placement on the ground surface. Accordingly, the...
-
Emergency Communications [4.10.14]
Emergency two-way communication devices, where provided, must meet the ASME A17.1‒1990 standard. In order to accommodate people with hearing or speech impairments, ADAAG also...
-
F235.1 General
Recreational boating facilities shall comply with F235....
-
235.1 General
Recreational boating facilities shall comply with 235....
-
1016.6 Openings
This section requires openings in the surface of outdoor recreation access routes, passing spaces, and resting intervals such as spaces between the boards in a boardwalk and drainage grates...
-
11B-235.1 General
Recreational boating facilities shall comply with Section 11B-235. ...
-
12181(7)(I)
(I) a park, zoo, amusement park, or other place of recreation;...
-
235.1 General
Recreational boating facilities shall comply with 235....
-
11B-235.1 General
Recreational boating facilities shall comply with Section 11B-235....
-
11B-235.1 General
Recreational boating facilities shall comply with Section 11B-235....
-
§ 1194.2(a)(2)
(2) When procuring a product, if an agency determines that compliance with any provision of this part imposes an undue burden, the documentation by the agency supporting the...
-
E202.7 Best Meets
Where ICT conforming to one or more requirements in the Revised 508 Standards is not commercially available, the agency shall procure the ICT that best meets the Revised 508...
-
Appendix C to Part 1194—Functional Performance Criteria and Technical Requirements
[See subsections ...]
-
E.2. - Where an agency uses a best value "trade-off" source selection process, may it trade off applicable technical provisions of the Access Board’s standards where an offer provides strong technical merit, strong past performance, or a lower price?
The Access Board’s technical provisions are mandatory requirements that must be met (directly or through equivalent facilitation) unless (a) the product or service (if it is a...
-
APPENDIX C TO PART 1194 – FUNCTIONAL PERFORMANCE CRITERIA AND TECHNICAL REQUIREMENTS
[See subsections ...]