[See subsections ...]
Search Results "RERC Rec-Tech: Rehabilitation Engineering Research Center on Recreational Technologies"
-
Technical Requirements [1016]
-
Cross Slope [1016.7.2]
Cross slope is the side-to-side slope of the surface of an ORAR. When the surface is constructed of concrete, asphalt, or boards, the cross slope must be no steeper than 1:48 (2...
-
2.7 Tread Obstacles
Where tread obstacles exist on the surface of an ORAR, they shall not exceed 1 inch (25 mm) in height. Where the surface is paved or is elevated above the natural ground,...
-
3.1.3.3 Cross Slope of Driveways
The cross slope of driveways shall not exceed 1:33 (3 percent). Exception. The cross slope of driveways may be no more than 1:20 (5 percent) where needed to ensure proper...
-
3.2.2 ORARs in Camping Units
Connections shall be provided between site furnishings and constructed features in camping units as well as between accessible camping units, parking areas, and accessible common use...
-
3.1.3.2 Running Slope (Grade) of Driveways
The running slope of driveways shall be no more than 1:12 (8.33 percent) for no more than 50 feet (15 m). Exception 1. A running slope of up to 1:10 (10 percent) for driveways is...
-
1016.8.1 Length
This section requires resting intervals to be 60 inches long minimum.
-
2.5.2 Length
The resting interval length shall be 60 inches (1525 mm) long minimum.
-
2.5 Resting Intervals
Resting intervals shall comply with 2.5.
-
2.6.1 Size
The passing space shall be either:
-
1016.8 Resting Intervals
Resting intervals shall comply with 1016.8.
-
1016.8.1 Length
The resting interval length shall be 60 inches (1525 mm) long minimum.
-
11B-1002.4.5 Ride entry
Openings providing entry to wheelchair spaces on amusement rides shall be 32 inches (813 mm) minimum clear.
-
11B-1002.4.5 Ride entry
Openings providing entry to wheelchair spaces on amusement rides shall be 32 inches (813 mm) minimum clear.
-
1002.4.5 Ride Entry
Openings providing entry to wheelchair spaces on amusement rides shall be 32 inches (815 mm) minimum clear.
-
1002.4.5 Ride Entry
1002.4.5 Ride Entry. Openings providing entry to wheelchair spaces on amusement rides shall be 32 inches (815 mm) minimum clear.
-
Purpose of Direct Final Rule
the original issuance of our then-existing 508 Standards and 255 Guidelines, the ICT Final Rule was aimed at “refreshing” these regulations by, among other things, addressing changing technology...
-
UCLA Center for Autism Research and Treatment (CART)
The UCLA Center for Autism Research and Treatment (CART), a National Institutes of Health Autism Center of Excellence (ACE), plays a leading role — locally, nationally and internationally...
-
Communication / Devices / Equipment / Other
List specific communication needs: If (under stress after seizure), I may not make sense for a while. Leave me alone for 10-15 minutes, my mind should clear. I...
-
ClickAndGo Tactile Maps
ClickAndGo tactile maps are an excellent complement to ClickAndGo Navigation. Accessible to everyone, they facilitate a spatial understanding of one's environment and enhance...
-
Mass Audubon's Accessible Trails Manual
In 2014, the Institute of Museum and Library Services (IMLS) provided funding to produce a comprehensive guidelines manual for developing and sustaining an accessible interpreted...
-
1016.5 Obstacles
This section contains technical requirements for obstacles on outdoor recreation access routes, passing spaces, and resting intervals....
-
4.3 Reach Ranges
Figures 16-19 show key findings from the research. Figures 14-15. Forward and Lateral Reach Table 4 U.S....
-
Part 10- Access Methods - Hold Duration and Select on Release
This e-Learning video demonstrates how you can configure Proloquo2Go 3 direct access settings for Hold Duration and Select on Release to change how the touch screen reacts to a users...
