It references dimensions of clearance height and depth to the forward-most point on the person or mobility device (e.g., toe, footrest)....
Search Results "Dimension Range"
Filters
Commonly Searched Documents
-
Knee Clearance: Clearance as Measured from Anterior-Most Point - Manual Wheelchair
-
Knee Clearance: Clearance as Measured from Dorsal Foot Point - Manual Wheelchair
It references dimensions of clearance height and depth to the dorsal foot point on a person (e.g., top of ankle)....
-
1.2.1
1.2.1 Use the plus - or - minus symbol (±) after a dimension when it must be made clear what the expected tolerance is. This should be coordinated with the specification requirements....
-
11B-407.4.7.2 Keypads
The dot shall be 0.118 inch (3 mm) to 0.120 inch (3.05 mm) base diameter and in other aspects comply with Table 11B-703.3.1 _|Braille Dimensions|_....
-
603.4 Coat Hooks and Shelves
Coat hooks shall be located within one of the reach ranges specified in 308....
-
604.8.3 Coat Hooks and Shelves
Coat hooks shall be located within one of the reach ranges specified in 308....
-
7(1)(c)
(c) In U-shaped kitchens with sink or range or cooktop at the base of the "U", a 60-inch turning radius is provided to allow parallel approach, or base cabinets are removable at that location...
-
603.4 Coat Hooks and Shelves
Coat hooks shall be located within one of the reach ranges specified in 308....
-
§1193.41(g) Operable without time-dependent controls
Alternatively, a response time may be required if it can be by-passed or adjusted by the user over a wide range....
-
11B-706.4 Sound pressure level
Assistive listening systems shall be capable of providing a sound pressure level of 110 dB minimum and 118 dB maximum with a dynamic range on the volume control of 50 dB....
-
Digital Human Models
Such models can represent an individual of specific dimension, or can represent whole groups of individuals....
-
502.3.3 Values
Any current value(s), and any set or range of allowable values associated with an object, shall be programmatically determinable....
-
11B-605.1 General
Stall-type urinals provide greater accessibility for a broader range of persons, including people of short stature....
-
a. Transfer Surface Adjustability
The MDE NPRM proposed that the same transfer surface height range of 17 inches minimum to 19 inches maximum be applied to both diagnostic equipment used in the supine, prone, or side-lying...
-
Example 2: Without Cooking Facilities
An employee break room without fixed or built-in range cooking facilities is not considered a kitchen or kitchenette; therefore, they are not subject to compliance with the requirements...
-
M305.5 Head and Back Support
Where the incline of the back support can be modified while in use, head and back support shall be provided throughout the entire range of the incline....
-
504.4 Templates
content creation that conforms to all Level A and Level AA Success Criteria and all Conformance Requirements in WCAG 2.0 (incorporated by reference in Chapter 1) shall be provided for a range...
-
Controls [4.15.4]
Push bars are easier to use by a broader range of people because they can be operated with a closed hand, wrist, or forearm....
-
M302.3.3 Head and Back Support
Where the incline of the back support can be modified while in use, head and back support shall be provided throughout the entire range of the incline....
-
M301.3.3 Head and Back Support
Where the incline of the back support can be modified while in use, head and back support shall be provided throughout the entire range of the incline....
-
11B-604.8.3 Coat hooks and shelves
Coat hooks shall be located within one of the reach ranges specified in Section 11B-308....
-
Protrusion Limits: ADA Standard Section 307.2
Section 307.2 covers the current ADA Standards for protrusion limits.
-
Height: ADA Standard Section 704.4.1
the required 34 inches (865 mm) minimum keypad height can causes the highest operable part of the telephone, usually the coin slot, to exceed the maximum permitted side and forward reach ranges...
-
11B-809.9.2 Clear width
U-shaped kitchens, designed with parallel approach at a sink, range, cooktop or other fixtures and appliances located at the base of the U without knee and toe clearance, shall provide a...