(ii) have space to park and secure a wheelchair;
Search Results "Transfer Seat (Transportation)"
-
12162(a)(2)(D)(ii)
-
§ 37.5(i) Public and private entity distinctions
(i) Public and private entity distinctions.—
-
1009.4.4 Surface
Surfaces of transfer walls shall not be sharp and shall have rounded edges....
-
1009.5.5 Surface
The surface of the transfer system shall not be sharp and shall have rounded edges....
-
382.87 What other requirements pertain to seating for passengers with a disability?
382.87 What other requirements pertain to seating for passengers with a disability? These provisions are essentially the same as their counterparts in the existing regulation....
-
Surface
Surface The surface of the transfer platform and steps must not be sharp and must have rounded edges to prevent injuries....
-
Platform Height
Platform Height Transfer platforms must be between 16 and 19 inches high, measured from the deck....
-
Height
Height The transfer wall height must be 16 inches minimum to 19 inches maximum, measured from the deck....
-
Designated Aisle Seats
Designated Aisle Seats....
-
Islands: ADA Standard Section 406.7
Section 406.7 covers the current ADA Standards for islands.
-
11B-608.2.1 Reserved
ETA Editor's Note The transfer type shower compartments prescribed by 2010 ADAS 608.2.1 are not recognized as an accessible shower in California....
-
Sec. 12184. Prohibition of discrimination in specified public transportation services provided by private entities. [Section 303]
[See subsections ...]
-
1009.4.2 Height
The height of the transfer wall shall be 16 inches (405 mm) minimum and 19 inches (485 mm) maximum measured from the deck....
-
11B-1009.4.2 Height
The height of the transfer wall shall be 16 inches (406 mm) minimum and 19 inches (483 mm) maximum measured from the deck....
-
11B-1009.4.2 Height
The height of the transfer wall shall be 16 inches (406 mm) minimum and 19 inches (483 mm) maximum measured from the deck....
-
802.4 Designated Aisle Seats
Designated aisle seats shall comply with 802.4....
-
802.4 Designated Aisle Seats
Designated aisle seats shall comply with 802.4....
-
§ 37.45 Construction and alteration of transportation facilities by private entities
In constructing and altering transit facilities, private entities shall comply with the regulations of the Department of Justice implementing Title III of the ADA (28 CFR part...
-
5.4.4.1 Transfer Support Distance from Transfer Surface Recommendation for Stretchers
5.4.4.1 Transfer Support Distance from Transfer Surface Recommendation for Stretchers The Committee recommends locating the transfer support along the long side of the of the transfer...
-
Zurn Z5958 Series Commercial White, Closed Front Toilet Seat with Cover
Z5958 Series White, Closed Front Toilet Seat with Cover....
-
§ 38.23(d)(4) Orientation
barrier, extending from a height of 38 inches from the vehicle floor to a height of 56 inches from the vehicle floor with a width of 18 inches, laterally centered immediately in back of the seated...
-
11B-1009.2.5 Seat width
The seat shall be 16 inches (406 mm) wide minimum....
-
11B-1009.2.5 Seat width
The seat shall be 16 inches (406 mm) wide minimum....
-
11B-1009.2.5 Seat width
The seat shall be 16 inches (406 mm) wide minimum....
