The difference in elevation of a section of an ORAR, trail, or beach access route measured parallel to the predominant direction of travel. ...
Search Results "Measuring Technique"
-
Running Slope (Grade)
-
2.4.1
2.4.1 Based on the methods for measuring compliance, define what remedial actions are acceptable when construction elements exceed tolerances....
-
Laser scanners
These types of instruments could be used to measure floor flatness and level but they are very expensive, require training, and give accuracies in excess of what is needed for accessible...
-
1132A.3, Item 5
A pair of doors, manual or automatic, must have at least one leaf which provides a clear width of not less than 32 inches (813 mm), measured with the door positioned at an angle of 90 degrees...
-
1134A.6, Item 1.3
Other shower stall configurations shall measure at least 36 inches deep by 60 inches wide (914 mm by 1524 mm) with an entrance opening of at least 36 inches (914 mm) when a wall is installed...
-
§ 35.130(f)
(f) A public entity may not place a surcharge on a particular individual with a disability or any group of individuals with disabilities to cover the costs of measures, such as the provision...
-
11B-703.5.8 Character spacing
Character spacing shall be measured between the two closest points of adjacent characters, excluding word spaces....
-
1002.4.4.1 Width and Length
Wheelchair spaces shall provide a clear width of 30 inches (760 mm) minimum and a clear length of 48 inches (1220 mm) minimum measured to 9 inches (230 mm) minimum above the floor surface...
-
TERMS OF SETTLEMENT
. § 35.151) on Election Day, whether such compliance is achieved through permanent architectural measures or through the use of temporary measures such as those provided for in Paragraph...
-
Wheelbase Definition
Wheelbase Definition For the purpose of this analysis, wheelbase is defined as the distance from the center of the primary drive wheel to the center of the caster measured parallel to...
-
11B-502.6 Identification
Signs shall be 60 inches (1524 mm) minimum above the finish floor or ground surface measured to the bottom of the sign. [2010 ADAS] 502.6 Identification. ...
-
11B-502.6 Identification
Signs shall be 60 inches (1524 mm) minimum above the finish floor or ground surface measured to the bottom of the sign. [2010 ADAS] 502.6 Identification. ...
-
11B-502.6 Identification
Signs shall be 60 inches (1524 mm) minimum above the finish floor or ground surface measured to the bottom of the sign. [2010 ADA Standards] 502.6 Identification....
-
The Anti-Assembly Line: Why Your Rehab Should Be as Unique as You Are
If you went to a shoe store and the salesperson handed you a size 10 boot without measuring your foot, saying, "Well, size 10 works for most people," you would turn around and walk out....
-
Just Manufacturing Automatic Soap Dispenser
Pre-measured dispensing volume (1-1.5ml). Reservoir capacity 900ml - refillable. Sensor detection range adjustable....
-
Seton Parking Signs - Van Accessible with ISA
.063" Engineer Grade reflective aluminum to improve sign visibility at night Extend the life and performance of the sign by upgrading to Seton UltraTuff™ overlaminate Sign measures...
-
Seton Parking Signs - Blue Reserved Parking with ISA
.063" Engineer Grade reflective aluminum to improve sign visibility at night Extend the life and performance of the sign by upgrading to Seton UltraTuff™ overlaminate Sign measures...
-
Inclusion Solutions Blue Parking Stop
Steel installation anchors included Measures 72"L x 4"H x 6"W Weighs 30 lbs....
-
E205.1 General (Section-by-Section Analysis)
Conformance may nonetheless be achieved through a variety of techniques, including providing requisite accessibility through the manner in which the inaccessible file is delivered or publicly...
-
Professional Delhi Pain Management Centre Services
A modern Delhi Pain Management Centre like Vardan combines various physiotherapy techniques to improve mobility and reduce pain naturally....
-
11B-809.9.2 Clear width
Kitchens shall have a minimum clear width measured between any cabinet, work surface or the face of any appliance (excluding handles and controls) and the opposing cabinet, work surface,...
-
Character Spacing: ADA Standard Section 703.2.7
Character spacing shall be measured between the two closest points of adjacent raised characters within a message, excluding word spaces....
-
11B-703.2.7 Character spacing
Character spacing shall be measured between the two closest points of adjacent raised characters within a message, excluding word spaces....
-
Height: ADA Standard Section 505.4
Section 505.4 covers the current ADA Standards for the height of the top of the gripping surface of handrails.
