(ii) Clear floor space is provided at fixtures as shown in Fig. 7 (a), (b), (c) and (d). Clear floor space at fixtures may overlap. Fig. 7 Clear Floor Space for...
Search Results "Water Depth"
Filters
Commonly Searched Documents
-
7(2)(a)(ii)
-
24.1 Q. What types of grab bars should the reinforcement be designed to accommodate and what types may be used if the builder elects to install grab bars in some units at the time of construction?
A. The Guidelines do not prescribe the type of product for grab bars, or the structural strength for grab bars. The Guidelines only state that the necessary reinforcement must be...
-
1009.4.3 Wall Depth and Length
The depth of the transfer wall shall be 12 inches (305 mm) minimum and 16 inches (405 mm) maximum....
-
Regulatory Impact Analysis.
requirements for each of the following eight existing elements will exceed monetized benefits by more than $100 million when using the 1991 Standards as the comparative baseline: Side reach; water...
-
11B-1009.4.3 Wall depth and length
The depth of the transfer wall shall be 12 inches (305 mm) minimum and 16 inches (406 mm) maximum....
-
1011.2.1 Size and Location
positioned for forward approach to the receptacle opening; or 30 inches (760 mm) by 60 inches (1525 mm) positioned for a parallel approach to the receptacle opening Water...
-
Appendix 3 - Comparison of US Standards to IDEA Center Research
Knee Clearance Height (KCH) 685 69 640 515 742 Knee Clearance Depth...
-
5.2.1.2 Transfer Surface Depth Recommendation for M301
5.2.1.2 Transfer Surface Depth Recommendation for M301 The Committee recommends a minimum transfer surface depth of 17 inches for all M301 except imaging equipment....
-
11B-703.2.1 Depth
Raised characters shall be 1/32 inch (0.8 mm) minimum above their background.
-
5.2.2.2 Transfer Surface Depth Recommendation for M302
5.2.2.2 Transfer Surface Depth Recommendation for M302 The Committee recommends a minimum depth requirement of 17 inches for equipment used by patients in seated positions....
-
R405.3.3 Minimum Required Depth
R405.3.3 Minimum Required Depth....
-
Comfort Designs Tamper Proof Anti-ligature Grab Bars
Weep holes allow for water drainage....
-
306.3.3 Minimum Required Depth
306.3.3 Minimum Required Depth....
-
(5) Reinforced walls for grab bars
The final Guidelines for bathroom wall reinforcement remains essentially unchanged from the Option One guidelines. The only change made to these guidelines has been to subject powder...
-
Attachment I
The Water Department Service Counter - The counter is 42 inches above the finished floor. ...
-
2. Analysis of footrest clearance height and depth
value for Abdomen-Footrest Distal depth)....
-
11B-802.1.3 Depth
Advisory 11B-802.1.3 Depth. Figure 11B-802.1.3 (b) depicts a single wheelchair space with side entry....
-
11B-802.1.3 Depth
Advisory 11B-802.1.3 Depth. Figure 11B-802.1.3 (b) depicts a single wheelchair space with side entry....
-
Bobrick 24" Straight Grab Bar Peened B-6806.99 x 24
24" (610mm) long, 1-1/2" (38mm) dia. tubing, peened finish. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1/8" (3mm) thick,...
-
Bobrick 36" Straight Grab Bar Peened B-5806.99 x 36
36" (915mm) long, 1-1/4" (32mm) dia. tubing, peened finish. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1/8" (3mm) thick,...
-
Bobrick 36" Straight Grab Bar B-6806 x 36
36" (915mm) long, 1-1/2" (38mm) dia. tubing. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1⁄8" (3mm) thick, type 304...
-
Bobrick 24" Straight Grab Bar Peened B-5806.99 x 24
24" (610mm) long, 1-1/4" (32mm) dia. tubing, peened finish. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1/8" (3mm) thick,...
