Horizontal distances in the positive range represent offset distance away from the body (or barrier depth) when reaching over an obstruction in relation to the forward-most point, and the...
Search Results "Tread Depth"
Filters
Commonly Searched Documents
-
Locating Controls & Devices: Percent of People Who Can Reach the Matrix Cell Indicated While Holding 5 lb Weight - Forward Approach Manual Wheelchair
-
C. Defendants' Transaction Counter
"The parties agree" that at "the subject facility, defendant Starbucks has one continuous transaction counter, uniform in height and depth, designed for customers using wheelchairs to make...
-
11B-1002.4.4.2 Side entry
For example, where a 42 inch (1065 mm) opening is provided, a minimum clear space of 60 inches (1525 mm) in length and 36 inches (915mm) in depth is needed to ensure adequate space for maneuvering...
-
11B-1002.4.4.2 Side entry
For example, where a 42 inch (1065 mm) opening is provided, a minimum clear space of 60 inches (1525 mm) in length and 36 inches (915mm) in depth is needed to ensure adequate space for maneuvering...
-
AquaTrek2 AQ-350 Aquatic Wheelchair
The AQ-250 has a reduced seat depth of 17” to create a posture correction which is ideal for average height adults....
-
AquaTrek2 AQ-250PC Aquatic Wheelchair
The AQ-250 has a reduced seat depth of 17” to create a posture correction which is ideal for average height adults....
-
AquaTrek2 AQ-150 Child Size Aquatic Wheelchair
The AQ-250 has a reduced seat depth of 17” to create a posture correction which is ideal for average height adults....
-
M302.2.3 Size (Section-by-Section Analysis)
Many Committee members expressed concern about the adequacy of the transfer surface depth. Id....
-
11B-407.4.1 Car dimensions
prohibits strict compliance with Section 11B-407.4.1, existing elevator car configurations that provide a clear floor area of 18 square feet (1.67 m2) minimum and also provide an inside clear depth...
-
11B-407.4.1 Car dimensions
prohibits strict compliance with Section 11B-407.4.1, existing elevator car configurations that provide a clear floor area of 18 square feet (1.67 m2) minimum and also provide an inside clear depth...
-
6 [§ 4.7.7]
6 [§ 4.7.7] Detectable warnings are dome-shaped bumps that should cover the entire width and depth of the ramp run....
-
Is it OK to examine a patient who uses a wheelchair in the wheelchair, because the patient cannot get onto the exam table independently?
(See Part 4 of this publication for a more in-depth discussion of accessible exam tables.)...
-
Comparison of Single-User Toilet Room Layouts: Plan 3
An out-swinging door also minimizes the overall layout depth and cannot swing over the required clear floor space or clearance at any accessible plumbing fixture....
-
Facility
Knee and toe clearance complying with 306 shall be providing. (17” min. depth.) 902 Dining Surfaces and Work Surfaces. 902.3 Height....
-
Grab Bars [4.20.4] and Controls [4.20.5]
Seats at the head of the tub are limited to a 15 inch depth so that back support is available from the side wall (which is why grab bars cannot be placed on the seat wall)....
-
11B-705.1.2.2.2.1 One entrance/exit point
Where it is technically infeasible to provide a minimum 72 inches (1828 mm) wide turning space, as measured perpendicular to the curb, the depth of detectable warnings may be reduced to...
-
Test Courses & Surfaces
., compacted to a depth of 5 in.) CPBR Engineered Wood Fiber J (loose-fill processed wood fibers, compacted to a depth of 5 in.)...
-
Wheelchair Spaces (M303.2)
M303.2 includes technical criteria for orientation, width, depth, and knee and toe clearance at wheelchair spaces....
-
1012.3 Opening limitations
Exceptions: The triangular openings formed by the riser, tread and bottom rail at the open side of a stairway shall be of a maximum size such that a sphere of 6 inches (152 mm)...
-
Circulation Path
corridors, doors, stairs, smokeproof enclosures, horizontal exits, ramps, exit passageways, escalators, moving walkways, fire escape stairs, fire escape ladders, slide escapes, alternating tread...
-
Suggested accessibility guidelines for exterior concrete surfaces
The tolerance for deviation from slope or plane for a stair tread from the back to the nosing is ± ¼ in (6 mm)....
