Additional space is required when the space is confined on three sides and is obstructed for more than half the depth, such as when elements are recessed in alcoves....
Search Results "Tread Depth"
-
Surface and Size [§305.2 and §305.3]
-
11B-610.2 Bathtub seats
The depth of a removable in-tub seat shall be 15 inches (381 mm) minimum and 16 inches (406 mm) maximum. The seat shall be capable of secure placement....
-
Maximum Force
Specifically, the Board asked whether a maximum 3.5 pounds of force and a maximum 1/10 inch stroke depth provide sufficient accessibility for the use of operable parts activated by a single...
-
11B-809.12 Electrical receptacles, controls and switches
When the reach is over a kitchen work surface and base cabinet, the work surface shall be 36 inches (914 mm) maximum above the finish floor and 25 1/2 inches (650 mm) maximum in depth....
-
Appendix A National Trails Surface Study Participating Stabilizer Companies
Soil Type Preference Aggregate Type Specs Depth of Soil and/or Aggregate Mix Klingstone 400 Klingstone Inc. ...
-
4.3.5.3 180-degree turn around an obstacle
In our research, we studied the impact of keeping the depth of the turning area and the entry/egress aisle width identical....
-
StaLok
StaLok arrives pre‐mixed with ¼ inch minus aggregate and is applied at a 2-inch depth on top of the base....
-
The American Society on Aging
The breadth and depth of information available from ASA's conference, webinars and publications, and the diversity of perspective and experience that characterizes ASA’s membership, are...
-
Islands: ADA Standard Section 406.7
Section 406.7 covers the current ADA Standards for islands.
-
1. Measuring Tape
A metal measuring tape is an essential tool for a successful survey because many of the accessibility requirements concern the width, height, or depth of various features....
-
M302.4.1 Clearance in Base
Where the width of the examination surface is less than 36 inches (915 mm), the clearance depth shall extend the full width of the equipment....
-
M301.4.1 Clearance in Base
Where the width of examination surfaces is less than 36 inches (915 mm), the clearance depth shall extend the full width of the equipment....
-
406.8 Detectable Warnings
The detectable warning shall extend the full width of the curb ramp (exclusive of flared sides) and shall extend either the full depth of the curb ramp or 24 inches (610 mm) deep minimum...
-
Knee Clearance: Clearance as Measured from Anterior-Most Point - Manual Wheelchair
It references dimensions of clearance height and depth to the forward-most point on the person or mobility device (e.g., toe, footrest)....
-
Knee Clearance: Clearance as Measured from Dorsal Foot Point - Manual Wheelchair
It references dimensions of clearance height and depth to the dorsal foot point on a person (e.g., top of ankle)....
-
M302.4.1 Clearance in Base
Where the width of the examination surface is less than 36 inches (915 mm), the clearance depth shall extend the full width of the equipment....
-
M301.4.1 Clearance in Base
Where the width of the examination surface is less than 36 inches (915 mm), the clearance depth shall extend the full width of the equipment....
-
Is additional latch side clearance required on the push side of doors with a forward approach when either a latch or closer (but not both) is provided?
This is also true for the additional depth required for hinge approaches on the push side when both a closer and latch is provided....
-
11B-610.2 Bathtub seats
The depth of a removable in-tub seat shall be 15 inches (381 mm) minimum and 16 inches (406 mm) maximum. The seat shall be capable of secure placement....
-
Benches [1011.2]
This clear ground space must not overlap the ORAR, trail tread, or another clear ground space....
-
1003.2.12.2 Opening limitations
Exceptions: The triangular openings formed by the riser, tread and bottom rail at the open side of a stair- way shall be of a maximum size such that a sphere of 6 inches (152 mm...
-
F216.13 Trailhead Signs
The technical requirements in 1017.11 require the signs to include information on the length of the trail or trail segment; surface type; typical and minimum tread width; typical and minimum...
-
EZ-ACCESS Transitions® Angled Entry Plate
Slip-resistant Surface The Transitions Angled Entry Plate features a superior applied tread for high traction....
