We are currently finishing additional Pocket Guide versions covering selected state access standards. ...
Search Results "Finish"
-
Updates and Other Pocket Guides
-
11B-703.7.2.6 Toilet and bathing facilities geometric symbols
The symbol shall be mounted at 58 inches (1473 mm) minimum and 60 inches (1524 mm) maximum above the finish floor or ground surface measured from the centerline of the symbol....
-
Operable controls (Preamble, Section-by-Section Analysis)
controls were provided, including on/off switches, buttons, dials and knobs, mice, keypads and other input devices, copier paper trays (both for inserting paper to be copied and retrieving finished...
-
Tips for Assisting People Who Are Deaf, Hard of Hearing, or Deaf-Blind
Write as large as possible and start in the upper left for a “W” and finish in the upper right. Use the entire palm area for each letter....
-
Benches
The seat height should be a minimum of 17 inches to a maximum of 19 inches above the finished floor....
-
1. Accessible route(s)
On-grade walks or paths between separate buildings with covered multifamily dwellings, while not required, should be accessible unless the slope of finish grade exceeds 8.33% at any point...
-
Paragraph (h) Non-interference with hearing technologies (Section-by-Section Analysis)
They urged the Board to defer any such requirement until the ANSI C63 Committee had finished its work....
-
Material Characteristics (slide 6)
Matte Finishes Other just general things that are important. Matte finishes (slide 6) are always better than specular surfaces or polished granite....
-
11B-805.6 Hand washing fixtures, lavatories and sinks
to Section 11B-306.3.3, Exception 1 which states: "At lavatories required to be accessible by Section 11B-213.3.4, the knee clearance shall be 27 inches (686 mm) high minimum above the finish...
-
11B-805.6 Hand washing fixtures, lavatories and sinks
to Section 11B-306.3.3, Exception 1 which states: "At lavatories required to be accessible by Section 11B-213.3.4, the knee clearance shall be 27 inches (686 mm) high minimum above the finish...
-
Attachment E
The sign shall be mounted on the wall adjacent to the latch side of the door with the centerline of the sign at 60 inches above the finished floor and situated such that a person can approach...
-
EXHIBIT A Required Accessible Elements at QuikTrip Stores
Any other alterations or modifications to fuel dispensers, self-service payment mechanisms, and call buttons that do not provide for a side reach of 48 inches or less above the finished...
-
Updates and Other Pocket Guides
We are currently finishing Pocket Guides for the ABA Standards as adopted by GSA, and other versions covering selected state access standards. ...
-
203 General Exceptions
Employee work areas, or portions of employee work areas, other than raised courtroom stations, that are less than 300 square feet (28 m2) and elevated 7 inches (180 mm) or more above the finish...
-
4.1.4(7) FACTORY INDUSTRIAL
Factory industrial occupancy includes, among others, the use of a building or structure, or portion thereof, for assembling, disassembling, fabricating, finishing, manufacturing, packaging...
-
1136A.1 Receptacle heights
more than 48 inches (1219 mm) measured from the top of the receptacle outlet box nor less than 15 inches (381 mm) measured from the bottom of the receptacle outlet box to the level of the finished...
-
Salsbury Industries See Through Metal Locker
Requires the Registered User plan or above. Login! -
Toilet Paper Dispensers
inches maximum in front of the water closet measured to the centerline of the dispenser.The paper outlet of the dispenser must be located 15 inches minimum and 48 inches maximum above the finish...
-
1136A.1 Receptacle heights
more than 48 inches (1219 mm) measured from the top of the receptacle outlet box nor less than 15 inches (381 mm) measured from the bottom of the receptacle outlet box to the level of the finished...
-
5.1 Transfer Surface Height Recommendations
5.1 Transfer Surface Height Recommendations Description: The transfer height is set above the finished floor surface to permit transfers form mobility devices onto the transfer surface...
-
203.9 Employee Work Areas
Employee work areas, or portions of employee work areas, other than raised courtroom stations, that are less than 300 square feet (28 m2) and elevated 7 inches (180 mm) or more above the finish...
-
2. b. ii. Accessible Door Hardware
Hardware required for accessible door passage shall be mounted no higher than 48 in (1220 mm) above finished floor. xv Figure 14 and 15 (top and bottom left) Non-accessible door...
-
1136A.1 Receptacle heights
more than 48 inches (1219 mm) measured from the top of the receptacle outlet box nor less than 15 inches (381 mm) measured from the bottom of the receptacle outlet box to the level of the finished...
-
Flush Controls on Toilets
Hand operated flush controls shall comply with 309.2 and 309.4 and shall be installed 36 inches (915 mm) maximum above the finish floor....
