It is recognized that the coefficient of friction varies considerably due to the presence of contaminants, water, floor finishes, and other factors not under the control of the designer...
Search Results "Finish"
-
A4.5.1 General
-
Appendix A National Trails Surface Study Participating Stabilizer Companies
DirtGlue DirtGlue Polymer Semi Good for most; no clay All soil types Max ¾ inch; the smaller the better; creates smoother surface of finished...
-
Installation of Test Surfaces
Overlap courses of geotextile by 5 inches. 6) Spread wood fiber to a depth of 1.5 times the target depth. 7) Hand rake for a smooth finished surface. 8) Install retaining borders...
-
11B-203.9 Employee workstations
Employee work areas, or portions of employee work areas, other than raised courtroom stations, that are less than 300 square feet (28 m2) and elevated 7 inches (180 mm) or more above the finish...
-
11B-203.9 Employee workstations
Employee work areas, or portions of employee work areas, other than raised courtroom stations, that are less than 300 square feet (28 m2) and elevated 7 inches (180 mm) or more above the finish...
-
Value Contrast (slide 9)
[When] they want to show off the art work, they often make all the finishes the same. So the walls and the floor and the ceilings and even the stands the things are on are all similar....
-
Thresholds at Exterior Doors/Thresholds to Balconies or Decks
The Guidelines further provide that the finished surface of this area, located immediately outside the entry door, may be sloped for drainage, but the sloping may be no more than 1/8 inch...
-
CCDA Accessibility Checklist for Building Inspectors, 2015 Edition
During construction inspection finish product thicknesses such as flooring materials or wall coverings must be considered when reviewing critical accessibility features, including but not...
-
B. The ADA Standards for Accessible Design
A portion of the counter surface that is 36 inches (915 mm) long minimum and 36 inches (915 mm) high maximum above the finish floor shall be provided....
-
11B-104.1.1 Construction and manufacturing tolerances
result in usable construction, notes and dimensions in construction documents should anticipate expected tolerances so that a required dimensional range is not exceeded by the addition of a finish...
-
11B-104.1.1 Construction and manufacturing tolerances
result in usable construction, notes and dimensions in construction documents should anticipate expected tolerances so that a required dimensional range is not exceeded by the addition of a finish...
-
Reach Ranges
The 2010 Standards, at section 308.3, lower that maximum height to 48 inches above the finish floor or ground....
-
Amenities
There shall be no projections into the required clear opening width lower than 34 inches and 80 inches above the finish floor or ground shall not exceed 4 inches....
-
A. Question 1: Applicability of Section 904.4.1’s Exception
Section 904.4.1 and its exception both require that a sales or service counter be “36 inches (915 mm) high maximum above the finish floor,” and Section 904.4.1 further requires that a sales...
-
How is slip resistance measured?
of the static coefficient of friction provides a reasonable approximation of the slip resistance of most surfaces and is the method most appropriate for evaluating surface materials and finishes...
-
ANSWERS TO DISABILITY SAVVY QUIZ
Do not interrupt or help people finish their sentences. When communicating with people with hearing disabilities… 26....
-
Bonded Impact/cushioning Surfaces
All surfaced specimens were compacted to simulate the finished surface of a play area....
-
Rockwood Manufacturing Company BF687 BF Series Men's ADA Toilet Room Sign
Metal Signs: Available in standard architectural finishes. Fastener: 4 ea. #6 x 5/8 OH SMS Size: 8" x 8" Ordering: Specify background finish along with any options....
-
Rockwood Manufacturing Company BF688 BF Series Women's ADA Toilet Room Sign
Metal Signs: Available in standard architectural finishes. Fastener: 4 ea. #6 x 5/8 OH SMS Size: 8" x 8" Ordering: Specify background finish along with any options....
-
Rockwood Manufacturing Company BF689 BF Series Unisex ADA Toilet Room Sign
Metal Signs: Available in standard architectural finishes. Fastener: 4 ea. #6 x 5/8 OH SMS Size: 8" x 8" Ordering: Specify background finish along with any options....
-
Sell Your Home Faster and for More Money: The Secret Weapon is Your Driveway
We give you the finish that screams quality. Stop hoping the market will forgive your deferred maintenance. It won't. The market rewards excellence. It rewards preparation....
-
Rockwood Manufacturing Company 80 Push Plate - .050" Thick 6" x 12" Plate
ANSI: J301 Most of Rockwood's products are available in a wide variety of architectural finishes....
-
Rockwood Manufacturing Company 620 UL Listed 160˚ Door Viewer For Doors 1-3/8" to 2"
ANSI A156.16: L03222, L03172 Most of Rockwood's products are available in a wide variety of architectural finishes....
