11B-703.2 Raised characters. Raised characters shall comply with Section 11B-703.2 and shall be duplicated in Braille complying with Section 11B-703.3....
Search Results "Character Height (Raised)"
Filters
Commonly Searched Documents
-
11B-703.2 Raised characters
-
T702.4 Character Height
Character height shall comply with Table T702.4. Character height shall be based on the uppercase letter “I”....
-
11B-703.2 Raised characters
Raised characters shall comply with Section 11B-703.2 and shall be duplicated in Braille complying with Section 11B-703.3....
-
11B-703.2 Raised characters
Raised characters shall comply with Section 11B-703.2 and shall be duplicated in Braille complying with Section 11B-703.3....
-
11B-703.4 Installation height and location
Signs with tactile characters shall comply with Section 11B-703.4....
-
703.2.2 Case
Characters shall be uppercase....
-
703.2.8 Line Spacing
Spacing between the baselines of separate lines of raised characters within a message shall be 135 percent minimum and 170 percent maximum of the raised character height....
-
703.2.1 Depth
Raised characters shall be 1/32 inch (0.8 mm) minimum above their background....
-
Keypads: ADA Standard Section 407.4.7.2
Section 407.4.7.2 covers the current ADA Standards for designations and indicators on elevator keypads.
-
Emergency Communication: ADA Standard Section 407.4.9
Section 407.4.9: covers the current ADA Standards for the elevator emergency communication systems.
-
11B-407.4.7.2 Keypads
Keypads shall be identified by characters complying with Section 11B-703.5 and shall be centered on the corresponding keypad button. The number five key shall have a single raised dot....
-
11B-407.2.3.1 Floor designation
Floor designations shall be provided in both raised characters and braille. Raised characters shall be 2 inches (51 mm) high....
-
11B-407.2.3.1 Floor designation
Floor designations shall be provided in both raised characters and Braille. Raised characters shall be 2 inches (51 mm) high....
-
11B-703.2.2 Case
Characters shall be uppercase....
-
703.2.2 Case
Characters shall be uppercase....
-
703.2.2 Case
Characters shall be uppercase....
-
11B-703.2.2 Case
Characters shall be uppercase....
-
703.2.2 Case
Characters shall be uppercase....
-
11B-703.2.2 Case
Characters shall be uppercase....
-
11B-407.2.3.1 Floor designation
Floor designations shall be provided in both raised characters and braille. Raised characters shall be 2 inches (51 mm) high....
-
4.30.3 Character Height
Characters and numbers on signs shall be sized according to the viewing distance from which they are to be read. The minimum height is measured using an upper case X....
-
11B-216.4.4 Delayed egress locks
Signs required by Chapter 10, Section 1010.1.9.7, Item 6.4 at doors with delayed egress locks shall comply with Sections 11B-703.1, 11B-703.2, 11B-703.3, and 11B-703.5.
-
Raised Diving Boards and Diving Platforms: ADA Standard Section 203.14
Section 203.14 covers scoping requirements of general exceptions for raised diving boards and diving platforms in the most current ADA Standards.
-
703.2.1 Depth
Raised characters shall be 1/32 inch (0.8 mm) minimum above their background....