Hello. Please sign in!

ABA Accessibility Standard for GSA Facilities Pocket Guide

703.2 Raised Characters.

Raised characters shall comply with 703.2 and shall be duplicated in braille complying with 703.3. Raised characters shall be installed in accordance with 703.4.

Advisory 703.2 Raised Characters. Signs that are designed to be read by touch should not have sharp or abrasive edges.

703.2.1 Depth.

Raised characters shall be 1/32 inch (0.8 mm) minimum above their background.

703.2.2 Case.

Characters shall be uppercase.

703.2.3 Style.

Characters shall be sans serif. Characters shall not be italic, oblique, script, highly decorative, or of other unusual forms. [ECTCR UFAS 4.30.4]

703.2.4 Character Proportions.

Characters shall be selected from fonts where the width of the uppercase letter "O" is 55 percent minimum and 110 percent maximum of the height of the uppercase letter "I". [ECTCR UFAS 4.30.4]

703.2.5 Character Height.

Character height measured vertically from the baseline of the character shall be 5/8 inch (16 mm) minimum and 2 inches (51 mm) maximum based on the height of the uppercase letter "I". [ECTCR UFAS 4.30.4]

EXCEPTION: Where separate raised and visual characters with the same information are provided, raised character height shall be permitted to be ½ inch (13 mm) minimum.  

An Enlarged detail shows the character height measured from the baseline of the character is five-eighths to 2 inches (16 to 51 mm) based on the uppercase letter I.

Figure 703.2.5 Height of Raised Characters

703.2.6 Stroke Thickness.

Stroke thickness of the uppercase letter "I" shall be 15 percent maximum of the height of the character. [ECTCR UFAS 4.30.4]

703.2.7 Character Spacing.

Character spacing shall be measured between the two closest points of adjacent raised characters within a message, excluding word spaces. Where characters have rectangular cross sections, spacing between individual raised characters shall be 1/8 inch (3.2 mm) minimum and 4 times the raised character stroke width maximum. Where characters have other cross sections, spacing between individual raised characters shall be 1/16 inch (1.6 mm) minimum and 4 times the raised character stroke width maximum at the base of the cross sections, and 1/8 inch (3.2 mm) minimum and 4 times the raised character stroke width maximum at the top of the cross sections. Characters shall be separated from raised borders and decorative elements 3/8 inch (9.5 mm) minimum. [ECTCR UFAS 4.30.4]

703.2.8 Line Spacing.

Spacing between the baselines of separate lines of raised characters within a message shall be 135 percent minimum and 170 percent maximum of the raised character height. [ECTCR UFAS 4.30.4]

[MORE INFO...]

*You must sign in to view [MORE INFO...]