Call buttons shall be 3/4 inch (19 mm) minimum in the smallest dimension and shall comply with 309....
Search Results "ACD: Automatic Call Distribution"
Filters
Commonly Searched Documents
-
409.2 Call Buttons
-
11B-411.2.1.1 Location
Hall call consoles shall be wall-mounted. On floors with a building entry, including parking and transfer levels, each hoistway entrance shall be adjacent to a hall call console....
-
11B-411.2.1 Hall call consoles
Hall call consoles shall comply with Sections 11B-411.2.1 and 11B-309....
-
11B-411.2.1 Hall call consoles
Hall call consoles shall comply with Sections 11B-411.2.1 and 11B-309....
-
11B-411.2.1 Hall call consoles
Hall call consoles shall comply with Sections 11B-411.2.1 and 11B-309....
-
4.13.12* AUTOMATIC DOORS AND POWER-ASSISTED DOORS
If an automatic door is used, then it shall comply with American National Standard for Power-Operated Doors, ANSI A156.10-1979....
-
Automatic Door Break Out Openings
Automatic Door Break Out Openings. The 1991 Standards do not contain any technical requirement for automatic door break out openings....
-
11B-404.3.1 Clear width
The minimum clear width for automatic door systems in a doorway shall provide a clear, unobstructed opening of 32 inches (813 mm) with one leaf positioned at an angle of 90 degrees from...
-
11B-411.2.1.6 Identification of floors served
In buildings with two or more elevator banks, each serving a different group of specific floors, hall call consoles located on floors with a building entry, including parking and transfer...
-
11B-407.2.1.4 Location
The call button that designates the up direction shall be located above the call button that designates the down direction. Exception: Reserved....
-
11B-409.2 Call buttons
Call buttons shall be ¾ inch (19.1 mm) minimum in the smallest dimension and shall comply with Section 11B-309....
-
11B-409.2 Call buttons
Call buttons shall be ¾ inch (19.1 mm) minimum in the smallest dimension and shall comply with Section 11B-309 _|Operable Parts|_....
-
11B-409.2 Call buttons
Call buttons shall be ¾ inch (19.1 mm) minimum in the smallest dimension and shall comply with Section 11B-309 _|Operable Parts|_....
-
11B-411.2.1.2.5 Audio output
At hall call console locations where the ambient sound level varies, auditory volume shall be maintained at the required volume by an automatic gain control or shall be set at not less than...
-
4.10.3 Hall Call Buttons
Call buttons in elevator lobbies and halls shall be centered at 42 in (1065 mm) above the floor....
-
4.10.3 HALL CALL BUTTONS
Call buttons in elevator lobbies and halls shall be centered at 42 in (1065 mm) above the floor....
-
11B-411.2.1.3.3 Proximity of required elements
Required features shall be provided on a hall call console assembly or as individual elements grouped in close proximity....
-
11B-411.2.1.3.3 Proximity of required elements
Required features shall be provided on a hall call console assembly or as individual elements grouped in close proximity....
-
11B-411.2.1.3.3 Proximity of required elements
Required features shall be provided on a hall call console assembly or as individual elements grouped in close proximity....
-
Call Button Clear Floor Space
...are all of the elevator lobbies free of ash trays or other elements placed below the elevator call buttons that project more than 4"?...
-
220 Automatic Teller Machines and Fare Machines
220 Automatic Teller Machines and Fare Machines...
-
11B-707 Automatic teller machines, fare machines and point-of-sale devices
11B-707 Automatic teller machines, fare machines and point-of-sale devices [2010 ADA Standards] 707 Automatic Teller Machines and Fare Machines Advisory 707 Automatic teller machines...
-
11B-220.1 Automatic teller machines and fare machines
SECTION TITLE NOTES 11B-220.1 Automatic teller machines and fare machines. ...
-
707 Automatic Teller Machines and Fare Machines
Section 707 provides specifications for Automatic Teller Machines (ATMs) and fare machines....