(a) Until 100 percent of the fleet of a large or small operator uses to provide fixed-route service is composed of accessible OTRBs, the operator shall meet the following interim service...
Search Results "Accessibility Requirement"
-
§ 37.193(a)
-
§ 38.111(a)
(a) New, used and remanufactured intercity rail cars, to be considered accessible by regulations in part 37 of this title shall comply with this subpart to the extent required for each type...
-
IV. Request for Public Comments
ANPRM, the Department is particularly interested in receiving comments from all of those who have a stake in ensuring that the websites of public accommodations and public entities are accessible...
-
1.1.1
1.1.1 When a maximum or minimum dimension is a regulatory requirement use a drawing dimension that is less than a maximum limit or more than a minimum limit....
-
11B-207.1 General
Exceptions: Where means of egress are permitted by local building or life safety codes to share a common path of egress travel, accessible means of egress shall be permitted to share...
-
A. Overview Of The Relevant Statutory And Regulatory Provisions
It requires that new construction, such as Defendants’ stores, be “readily accessible to and usable by individuals with disabilities.”3 42 U.S.C. § 12183(a)(1). ...
-
204.1 General
Within areas of sport activity, protruding objects on circulation paths shall not be required to comply with 307. 2....
-
4.1.1(2) Application Based on Building Use
Special application sections 5 through 10 provide additional requirements for restaurants and cafeterias, medical care facilities, business and mercantile, libraries, accessible transient...
-
§ 35.151(b)(4)(ii)(C) Safe harbor
If a public entity has constructed or altered required elements of a path of travel in accordance with the specifications in either the 1991 Standards or the Uniform Federal Accessibility...
-
11B-809.4.1 Subsequent bathrooms
ETA Editor's Note The requirement for an accessible shower at subsequent bathrooms prescribed by CBC 11B-809.4.1 is not required by 2010 ADAS....
-
1018.3 Aisles in Groups B and M
In Group B and M occupancies, the minimum clear aisle width shall be determined by Section 1005.1 for the occupant load served, but shall be not less than that required for corridors by...
-
4.Information, documentation, and training
Manufacturers should include in general product information the contact method for obtaining the information required by this section....
-
State and Local Government Facilities: Guidance on the Revisions to 28 CFR Section 35.151
35.151(a), which provided that those facilities that are constructed or altered by, on behalf of, or for the use of a public entity shall be designed, constructed, or altered to be readily accessible...
-
M302.4 Lift Compatibility (Section-by-Section Analysis)
M302.4.1) or clearance around base (proposed M302.4.2) technical requirements....
-
4.1.3(17)(a)
(a) If public pay telephones, public closed circuit telephones, or other public telephones are provided, then they shall comply with 4.31.2 through 4.31.8 to the extent required by the following...
-
Section 35.151 New construction and alterations (Section-by-Section Analysis)
35.151(a), which provided that those facilities that are constructed or altered by, on behalf of, or for the use of a public entity shall be designed, constructed, or altered to be readily accessible...
-
Usable
This requirement includes providing access to information and documentation for the product or service, including instructions and user guides....
-
III-5.4300 Transportation terminals
facility - including boarding, debarking, loading and unloading, baggage claim, dining facilities, and other common areas open to the public - are located on the same floor level and on an accessible...
-
Amenities
Fitness rooms need to provide an accessible path of travel to all different types of equipment....
-
Alterations and Additions [F245.2.3]
When altering or adding picnic units to an existing picnic facility, the scoping requirements apply only to the picnic units that are altered or added until the required minimum number of...
-
11B-604.5 Grab bars
Where separate grab bars are required on adjacent walls at a common mounting height, an L-shaped grab bar meeting the dimensional requirements of Sections 11B-604.5.1 and 11B-604.5.2 shall...
-
III-3.1000 General
The specific requirements discussed below in III−4.0000 are all designed to effectuate the general requirements....
-
M301.4.1 Clearance in Base (Section-by-Section Analysis)
The Access Board sought input in question 25 in the MDE NPRM preamble, on whether the proposed dimensions for the clearance in base requirement is sufficient to allow for the use of portable...