Transfer supports and their connections shall be capable of resisting vertical and horizontal forces of 250 pounds (1,112 N) applied at all points on the transfer support....
Search Results "Horizontal Position"
Filters
Commonly Searched Documents
-
M305.2.2 Structural Strength
-
11B-904.4.2 Forward approach
A clear floor or ground space complying with Section 11B-305 shall be positioned for a forward approach to the counter. [2010 ADA Standards] 904.4.2 Forward Approach....
-
11B-1009.2.4 Seat
lift seat shall be designed to allow a stop at 17 inches (432 mm) minimum to 19 inches (483 mm) maximum measured from the deck to the top of the seat surface when in the raised (load) position...
-
Accessible Means of Egress
A continuous and unobstructed way of egress travel from any point in a building or facility that provides an accessible route to an area of refuge, a horizontal exit, or a public way....
-
106.5.2 Accessible Means of Egress
A continuous and unobstructed way of egress travel from any point in a building or facility that provides an accessible route to an area of refuge, a horizontal exit, or a public way....
-
711.4.3 Nonfire-resistance-rated assemblies
Penetrations of horizontal assemblies without a required fire-resistance rating shall meet the requirements of Section 707 or shall comply with Sections 711.4.3.1 through 711.4.3.2....
-
711.4.5 Dissimilar materials
Noncombustible penetrating items shall not connect to combustible materials beyond the point of firestopping unless it can be demonstrated that the fire-resistance integrity of the horizontal...
-
1g
Is there a horizontal grab bar on the wall opposite the seat as shown in Figure 37(a) above?...
-
6. Grab Bar
Is there a horizontal grab bar on the wall opposite the seat for stabilization and aid in maneuvering while in a shower wheelchair?...
-
Beds: ADA Standard Section 807.2.3
The clear floor space shall be positioned for parallel approach to the side of the bed....
-
Height: ADA Standard Section 604.9.3
Section 604.9.3 covers the current ADA Standards for the height of children's use water closets.
-
11B-604.9.3 Height
Seats shall not be sprung to return to a lifted position....
-
Behavioral Safety Products #DH410 Cylindrical Ligature Resistant Lever Handle
The lever handle's stationary position is horizontal, but rotates freely up or down (bidirectional) to allow slippage of any ligature device in an attempt to tie or wrap over the top or...
-
American Specialties 9012 Surface Mounted Baby Changing Station
under the unloaded bed tray, after installation, of 27" to 27-3/8" [686 to 695] and the rim of the changing table will be 30-13/16" to 31-3/16" [783 to 792] above finished floor when in horizontal...
-
Door and Gate Opening Force: ADA Standard Section 404.2.9
Section 404.2.9 covers the current ADA Standards for door and gate opening force.
-
10.3.2(4)
floor shall be coordinated so that the vertical difference, measured when the vehicle is at rest, is within plus or minus 1‒1/2 inches under all normal passenger load conditions, and the horizontal...
-
Wheelchair Spaces, Ride Seats Designed for Transfer, and Transfer Devices: ADA Standard Section 206.2.9.2
Section 206.2.9.2 covers the ADA Standards for accessible routes to wheelchair spaces, ride seats designed for transfer and transfer devices in amusement rides.
-
11.2 Q. Under the individual building test, at what point of the planned entrance is the measurement taken?
On a horizontal plane, the center of each individual doorway should be the point of measurement when measuring to an arrival point, whether the doorway is an entrance door to the building...
-
1132A.9 Smooth surface
Parts creating horizontal or vertical joints in these surfaces shall be within 1/16 inch (1.6 mm) of the same plane as the other and be free of sharp or abrasive edges....
-
1132A.9 Smooth surface
Parts creating horizontal or vertical joints in these surfaces shall be within 1/16 inch (1.6 mm) of the same plane as the other and be free of sharp or abrasive edges....
-
Character Height: ADA Standard Section 703.5.5
Viewing distance shall be measured as the horizontal distance between the character and an obstruction preventing further approach towards the sign....
-
Husky 24" Line Generator Digital Laser Level
This level may use indoors or out for horizontal (level), vertical (plumb) and square alignment projects....
-
11B-807.2.3 Beds
The clear floor space shall be positioned for parallel approach to the side of the bed....
-
Accessible Means of Egress
A continuous and unobstructed way of egress travel from any point in a building or facility that provides an accessible route to an area of refuge, a horizontal exit, or a public way....
