With a flat, horizontal face that sits slightly above the desktop, this model is ideal for workstations that require heavy usage but still want to maintain a streamlined look....
Search Results "Horizontal Dispersion"
-
Mockett PCS49B Rectangular Power Grommet
-
1013.4 Raised character and braille exit signs
Each exit door through a horizontal exit that is required to comply with Section 1013.1, shall be identified by a sign with the words, “TO EXIT.”...
-
1015.2 Where required
equipment platforms, aisles, stairs, ramps and landings, that are located more than 30 inches (762 mm) measured vertically to the floor or grade below at any point within 36 inches (914 mm) horizontally...
-
1007.2.1 Elevators required
buildings equipped throughout with an automatic sprinkler system installed in accordance with Section 903.3.1.1 or 903.3.1.2, the elevator shall not be required on floors provided with a horizontal...
-
Elevator Doors
The proposed rule recognized horizontal sliding doors....
-
405.9 Edge Protection
Edge protection shall not be required on the sides of ramp landings having a vertical drop-off of ½ inch (13 mm) maximum within 10 inches (255 mm) horizontally of the minimum landing area...
-
§ 38.159(b)(7) Platform gaps
is at vehicle floor height with the inner barrier (if applicable) down or retracted, gaps between the forward lift platform edge and the vehicle floor shall not exceed 1/2 inch (13 mm) horizontally...
-
Sloped Surfaces
The amount of slope or grade is described as the proportion of a vertical rise to a horizontal length....
-
Running Slope [1017.7.1]
Running slope is often described as a ratio of vertical distance to horizontal distance, or rise to run (figure 9)....
-
810.5.3 Platform and Vehicle Floor Coordination
light rail, commuter rail, and intercity rail systems subject to Department of Transportation regulation 49 CFR 37.21 where it is not operationally or structurally feasible to meet the horizontal...
-
1009.3 Stairways
The clear width of 48 inches (1219 mm) between handrails is not required for stairways accessed from a refuge area in conjunction with a horizontal exit....
-
Standing Supports (M304.3 and M305.3)
M305.3 Proposed Provision: Also provides technical criteria for standing supports in horizontal and vertical positions....
-
224 Transient Lodging Guest Rooms
inaccessible transient lodging guest rooms (224.1.2) revised scoping for accessible beds (224.3) reduced scoping for guest rooms with accessible communication features (224.4) modified dispersion...
-
2.6
, (b) including wheelchair spaces as an integral part of the fixed seating plan, (c) providing the appropriate depth for cross aisles to wheelchair spaces and (d) satisfying applicable dispersion...
-
Accessible Play Components
Section 240.2.1 of the 2010 Standards specifies that where there is more than one accessible ground level play component, the components must be both dispersed and integrated....
-
Fishing piers and platforms. (Section-by-Section Analysis)
least twenty-five percent (25%) of railings at fishing piers and platforms to be no higher than 34 inches high, so that a person seated in a wheelchair can fish over the railing, to be dispersed...
-
Fishing piers and platforms. (Section-by-Section Analysis)
least twenty-five percent (25%) of railings at fishing piers and platforms to be no higher than 34 inches high, so that a person seated in a wheelchair can fish over the railing, to be dispersed...
-
11B-223.1.1 Alterations
As a facility is altered over time, every effort should be made to disperse accessible sleeping rooms among patient care areas such as pediatrics, cardiac care, maternity, and other units...
-
217 Telephones
In addition, 25 percent, but never less than one, of all other public telephones provided shall be equipped with a volume control and shall be dispersed among all types of public telephones...
-
11B-223.1.1 Alterations
As a facility is altered over time, every effort should be made to disperse accessible sleeping rooms among patient care areas such as pediatrics, cardiac care, maternity, and other units...
-
III-7.5180 Assembly areas
Dispersal of wheelchair seating is required in assembly areas where there are more than 300 seats....
-
1007.8 Exterior area for assisted rescue
Where walls or openings are between the area for assisted rescue and the interior of the building, the building exterior walls within 10 feet (3048 mm) horizontally of a nonrated wall or...
-
903.4 Back Support
Back support shall be 2 1/2 inches (64 mm) maximum from the rear edge of the seat measured horizontally. Advisory 903.4 Back Support....
-
704.10 Vertical exposure
lot, approved protectives shall be provided in every opening that is less than 15 feet (4572 mm) vertically above the roof of an adjoining building or adjacent structure that is within a horizontal...