The SZI 1029 is a high-powered infrared emitter for wideband or narrow-band signals from an IR modulator. Covers up to 12,500 sq. ft. in single channel mode; 6,250 sq. ft. in...
Search Results "Transfer System"
-
Sennheiser SZI 1029 Infrared Emitter
-
Sennheiser GZR 2020 Trolley for TourGuide Receivers and Transmitters Charging Case
The trolley GZR 2020 eases moving the TourGuide charging case EZL 2020-20L. The trolley can be easily locked on the charging case. The length of the trolley can be adjusted in two...
-
810.7 Public Address Systems
810.7 Public Address Systems. Where public address systems convey audible information to the public, the same or equivalent information shall be provided in a visual format....
-
Space Needs
Table 11 shows that for a given width of 40 inches (centered in front of the transfer station) that 25% of the subjects were able to perform a transfer to the platform in Protocol A (no...
-
11B-708.4 Residential dwelling unit communication systems
Communications systems between a residential dwelling unit and a site, building, or floor entrance shall comply with Section 11B-708.4....
-
11B-708.4 Residential dwelling unit communication systems
Communications systems between a residential dwelling unit and a site, building, or floor entrance shall comply with Section 11B-708.4....
-
5.3.2 Transfer Sides Recommendations for M301
5.3.2 Transfer Sides Recommendations for M301 Description: The transfer side provision requires the transfer surface to be located to provide options to transfer onto the short side and...
-
5.4.5.1 Transfer and Positioning Support Position Recommendation for Imaging Equipment
5.4.5.1 Transfer and Positioning Support Position Recommendation for Imaging Equipment On imaging equipment, the transfer surface is oriented along the long dimension of the surface where...
-
1008.3.2.2 Height
Each transfer step shall be 8 inches (205 mm) high maximum....
-
11B-1008.3.2.2 Height
Each transfer step shall be 8 inches (203 mm) high maximum....
-
11B-1008.3.2.2 Height
Each transfer step shall be 8 inches (203 mm) high maximum....
-
11B-1008.3.2.2 Height
Each transfer step shall be 8 inches (203 mm) high maximum....
-
1008.3.2.2 Height
Each transfer step shall be 8 inches (205 mm) high maximum....
-
Receiver Jacks: ADA Standard Section 706.2
Receivers required for use with an assistive listening system shall include a 1/8 inch (3.2 mm) standard mono jack....
-
11B-706.2 Receiver jacks
Receivers required for use with an assistive listening system shall include a 1/8 inch (3.2 mm) standard mono jack....
-
11B-706.2 Receiver jacks
Receivers required for use with an assistive listening system shall include a 1/8 inch (3.2 mm) standard mono jack....
-
1008.3.2.2 Height
Each transfer step shall be 8 inches (205 mm) high maximum....
-
Two-Way Communication Systems [§230 and §708]
Two-Way Communication Systems [§230 and §708] Where two-way communication systems are provided to gain entry to a facility or to restricted spaces, they must include visual and...
-
T211 Wheelchair Securement Systems
Wheelchair securement systems complying with the technical requirements in T603 must be provided at each wheelchair space....
-
F219 Assistive Listening Systems
[See subsections ...]
-
§ 38.103 Public information system
[See subsections ...]
-
219 Assistive Listening Systems
[See subsections ...]
-
T603.5 Securement Systems for Rear-Facing Wheelchair Positions
Rear-facing wheelchair securement systems shall provide forward excursion barriers and padded head rests that comply with ISO 10865-1:2012(E), Wheelchair containment and occupant retention...
-
5.2.2 Transfer Surface Size for Equipment Used by Patients in Seated Position
5.2.2 Transfer Surface Size for Equipment Used by Patients in Seated Position....
