Two grab bars shall be installed on the back wall, one located in accordance with Section 11B-609.4 and the other located 8 inches (203 mm) minimum and 10 inches (254 mm) maximum...
Search Results "Adjustable Height Counter"
-
11B-607.4.1.1 Back wall
-
11B-607.4.2.1 Back wall
Two grab bars shall be installed on the back wall, one located in accordance with Section 11B-609.4 and the other located 8 inches (203 mm) minimum and 10 inches (254 mm) maximum...
-
11B-407.4.8.1.1 Size
Characters shall be ½ inch (12.7 mm) high minimum.
-
11B-607.4.1.1 Back wall
Two grab bars shall be installed on the back wall, one located in accordance with Section 11B-609.4 and the other located 8 inches (203 mm) minimum and 10 inches (254 mm) maximum...
-
11B-703.4 Installation height and location
11B-703.4 Installation height and location. Signs with tactile characters shall comply with Section 11B-703.4....
-
1133A.4.1, Item 2
Base cabinets directly under the kitchen sink counter area and work surface shall be removable as required in Section 1133A.3....
-
11B-703.4.1 Height above finish floor or ground
11B-703.4.1 Height above finish floor or ground....
-
904.6 Security Glazing
Where counters or teller windows have security glazing to separate personnel from the public, a method to facilitate voice communication shall be provided....
-
904.6 Security Glazing
Where counters or teller windows have security glazing to separate personnel from the public, a method to facilitate voice communication shall be provided....
-
Mounting Location and Height [4.30.6]
Mounting Location and Height [4.30.6] Placement of tactile signs aside doors (latch-side) provides safety since locating signs on doors that swing out is hazardous....
-
11B-703.4.1 Height above finish floor or ground
[2010 ADAS] 703.4.1 Height Above Finish Floor or Ground. ...
-
904.6 Security Glazing
Where counters or teller windows have security glazing to separate personnel from the public, a method to facilitate voice communication shall be provided....
-
11B-904.6 Security glazing
Where counters or teller windows have security glazing to separate personnel from the public, a method to facilitate voice communication shall be provided....
-
11B-904.6 Security glazing
Where counters or teller windows have security glazing to separate personnel from the public, a method to facilitate voice communication shall be provided....
-
703.5.5 Character Height
Minimum character height shall comply with Table 703.5.5....
-
703.5.5 Character Height
Minimum character height shall comply with Table 703.5.5....
-
11B-904.6 Security glazing
Where counters or teller windows have security glazing to separate personnel from the public, a method to facilitate voice communication shall be provided....
-
Benches
The seat height should be a minimum of 17 inches to a maximum of 19 inches above the finished floor....
-
Drinking Fountains for Standing Persons
Specifications for drinking fountains for standing persons address the height of the spout outlet (602.7)....
-
Accessible Medical Equipment
Are height adjustable with a minimum of 17-19 inches from the floor to the top of the cushion? D.2....
-
M301.2.1 Transfer Surface Height
The same is true for height adjustability for DXA and some X-Ray systems....
-
36 CFR Part 1195 Standards for Accessible Medical Diagnostic Equipment
Published in the Federal Register on January 9, 2017. RIN 3014-AA40 AGENCY: Architectural and Transportation Barriers Compliance Board. ACTION: Final rule. SUMMARY: The...
-
M305.2.2 Length
The length of transfer supports shall comply with M305.2.2.1 or M305.2.2.2.
-
36 CFR Part 1195 Standards for Accessible Medical Diagnostic Equipment - Preamble
Published in the Federal Register on January 9, 2017. 36 CFR Part 1195 RIN 3014-AA40 Standards for Accessible Medical Diagnostic Equipment AGENCY: Architectural and...