Where the total length of the gangway or series of gangways serving as part of a required accessible route is 30 feet (9145 mm) minimum, gangways shall not be required to comply with 405.2...
Search Results "Segment Length"
-
1005.1 Accessible Routes
-
Part 1. Typical Issues for Voters Who Use Wheelchairs, Scooters or Other Mobility Aids
Ramps must also have edge protection to stop wheelchairs from falling off the sides, and level landings at the top and bottom of each segment and where a ramp changes direction....
-
ADA Tolerances - Additional Resources
1bf95c2cb091 TCNA Handbook, Tile Council of North America, has section on Accessibility https://www.tcnatile.com/products-and-services/publications.html Construction Tolerances for Segmental...
-
Gangway Slope and Rise Exceptions
Gangway Slope and Rise Exceptions Gangways must be designed to provide for a maximum 1:12 (8.33%) slope but are not required to be longer than 30 feet in length....
-
Technical Memorandum TM 2013-14 Dining Surfaces
Length Clear floor space complying with TAS 305 for a forward approach is required for an accessible dining surface based on TAS 902.2....
-
4. Wheelchair seat depth
Individual wheelchair seat depths are generally about 2 in. less than buttock-popliteal length in most case – this is a rough guideline and is quite similar to deciding seat depths for ambulatory...
-
11B-405.7.5 Doorways
Where a door swings onto a ramp landing width, additional ramp landing length as specified may be necessary to accommodate a clear level area for the wheelchair user to clear the door swing...
-
11B-809.10.7.3 Reinforcement for grab bars
The backing shall 40 (sic) inches (1016 mm) minimum in length....
-
4.1.3 Adjustable Height Chairs with and without Footplates
keeping their legs properly positioned.AA For those chairs that transform into examination tables, reducing the distance between the floor and seat height may also restrict the overall length...
-
Service Counters
A 30”x48” clear space is required immediately adjacent to the counter length for a parallel approach (A forward approach option is also available in 11B-904.4.2)....
-
11B-1005.1 Accessible routes
Where the total length of the gangway or series of gangways serving as part of a required accessible route is 30 feet (9144 mm) minimum, gangways shall not be required to comply with Section...
-
Gangway Alterations
Gangway Alterations Gangways on existing fishing facilities may be repaired or replaced without triggering the requirement to increase the gangway length....
-
Gangway Alterations
Gangway Alterations Gangways on existing boating facilities may be repaired or replaced without triggering the requirement to increase the gangway length....
-
Perpendicular and Angled Parking Spaces (R309.3) (Section-by-Section Analysis)
Perpendicular and Angled Parking Spaces (R309.3) (Section-by-Section Analysis) An access aisle must be provided at street level for the entire length of each accessible perpendicular...
-
4.5.3* Carpet
Exposed edges of carpet shall be fastened to floor surfaces and have trim along the entire length of the exposed edge. Carpet edge trim shall comply with 4.5.2....
-
11B-1005.1 Accessible routes
Where the total length of the gangway or series of gangways serving as part of a required accessible route is 30 feet (9144 mm) minimum, gangways shall not be required to comply with Section...
-
904.4.1 Parallel Approach
A clear floor or ground space complying with 305 shall be positioned for a parallel approach adjacent to the 36 inch (915 mm) minimum length of counter....
-
11B-502.4 Floor or ground surfaces
The access aisle needs to be adjacent to, and the same required length as the accessible space it serves....
-
11B-406.6 Islands
Each 48 inch (1220 mm) minimum by 36 inch (915 mm) minimum area shall be oriented so that the 48 inch (1220 mm) minimum length is in the direction of the running slope of the curb ramp it...
-
Islands: ADA Standard Section 406.7
Section 406.7 covers the current ADA Standards for islands.
-
11B-406.6 Islands
Each 48 inch (1220 mm) minimum by 36 inch (915 mm) minimum area shall be oriented so that the 48 inch (1220 mm) minimum length is in the direction of the running slope of the curb ramp it...
-
General: ADA Standard Section 222.1
Section 222.1 of the ADA Standards covers information in the current ADA Standards on scoping requirements for dressing, fitting, and locker rooms.
-
11B-502.4 Floor or ground surfaces
The access aisle needs to be adjacent to, and the same required length as the accessible space it serves....
-
Behavioral Safety Products #GB350 Suicide Resistant Safety Grab Bar with Full Closure Plate
Product Description We offer this suicide resistant grab bar in seven lengths: 18", 24", 30", 32", 36", 42", and 48"....
