shall be permitted to have a portion which is 24 inches (610 mm) long minimum complying with 904.4.1 provided that the required clear floor or ground space is centered on the accessible length...
Search Results "Segment Length"
-
904.4 Sales and Service Counters
-
406.4 Landings
The landing clear length shall be 36 inches (915 mm) minimum. The landing clear width shall be at least as wide as the curb ramp, excluding flared sides, leading to the landing....
-
208.1.2
The facility may not reduce the required number or dimensions of those spaces, or unnecessarily increase the length of the accessible route from a parking space to the facility....
- Landscape Forms Inc. Petoskey Bench Collection
-
Sloped Surfaces
The amount of slope or grade is described as the proportion of a vertical rise to a horizontal length....
-
11B-805.4.3 Turning space
Refer to the following examples: Exam room - Exam rooms are required to provide a turning space, accessible handwashing fixture, and 36-inch wide access along the full length of each...
-
11B-805.4.3 Turning space
Refer to the following examples: Exam room - Exam rooms are required to provide a turning space, accessible handwashing fixture, and 36-inch wide access along the full length of each...
-
11B-904.4 Sales and service counters
permitted to have a portion which is 24 inches (610 mm) long minimum complying with Section 11B-904.4.1 provided that the required clear floor or ground space is centered on the accessible length...
-
Introduction
First, we discussed in length the definitions/differences between examination tables and chairs to understand the medical equipment we are discussing....
-
704.10 Vertical exposure
are not required where the roof construction has a fire-resistance rating of not less than 1 hour for a minimum distance of 10 feet (3048 mm) from the adjoining building and the entire length...
-
11B-502.6.4.2
The centerline of the International Symbol of Accessibility shall be a maximum of 6 inches (152 mm) from the centerline of the parking space, its sides parallel to the length of the parking...
-
10.2.1(1)
(1) Where new bus stop pads are constructed at bus stops, bays or other areas where a lift or ramp is to be deployed, they shall have a firm, stable surface; a minimum clear length of 96...
-
6. ALTERNATIVES
Management and Budget (OMB) states that regulatory analyses should consider alternatives to the rule or regulation being evaluated.33 Thus, the Department considered alternatives regarding the length...
-
4.10.14* EMERGENCY COMMUNICATIONS
If the system uses a handset, then the length of the cord from the panel to the handset shall be at least 29 in (735 mm)....
-
Must elevator doors remain open for 20 seconds?
Reopening devices must remain effective for 20 seconds minimum, but in reopening, doors do not have to remain open for this length of time if unobstructed....
-
11B-705.1.2.3 Islands or cut-through medians
Exception: Detectable warnings shall be 24 inches (610 mm) minimum in depth at pedestrian islands or cut-through medians that are less than 96 inches (2438 mm) in length in the direction...
-
11B-812.7.2 Marking
Access aisle markings may extend beyond the minimum required length....
- EZ-ACCESS Transitions® Angled Entry Plate
-
Auxiliary aids and services: captioning and video interpreting services.
Moreover, the number of individuals with hearing loss continues to grow in this country as a large segment of the population ages and as people live longer. ...
-
Effective Emergency Management: Making Improvements for Communities and People with Disabilities
The report is divided into three segments: The Life Cycle of Comprehensive Emergency Management....
-
1003.2.2 Boarding Piers at Boat Launch Ramps
Where the total length of the gangway or series of gangways serving as part of a required accessible route is 30 feet (9145 mm) minimum, gangways shall not be required to comply with 405.2...
-
5.9 Standing Support Recommendations for M304 Diagnostic Equipment Used by Patients in a Standing Position
These standing supports may be provided in a horizontal position, vertical position, or a combination of horizontal and vertical positions, as long as the minimum length of gripping surface...
-
407.12.3.2 Obstructed Forward Reach (Section-by-Section Analysis)
An obstructed forward reach, for purposes of this section, occurs when the operable part is located behind the leading edge of the maximum protrusion within the length of the vertical reference...
-
3.3 Need for "Overriding" Principle
The concept and the research project through which we arrived at our performance recommendations will be expanded upon at length in the last section of this paper....