The provisions of Division 6 shall apply where required by Division 2 or where referenced by a requirement in this chapter....
Search Results "Referenced Standard"
Commonly Searched Documents
-
11B-601.1 Scope
-
11B-501.1 Scope
The provisions of Division 5 shall apply where required by Division 2 or where referenced by a requirement in this chapter....
-
F216.4.3 Directional Signs
Signs required by section 1003.2.13.6 of the International Building Code (2000 edition) or section 1007.7 of the International Building Code (2003 edition) (incorporated by reference, see "Referenced...
-
216.4.3 Directional Signs
Signs required by section 1003.2.13.6 of the International Building Code (2000 edition) or section 1007.7 of the International Building Code (2003 edition) (incorporated by reference, see "Referenced...
-
Vehicular Route Exceptions—Sections 206.2.1 and 206.2.2 of the 2010 Standards
The 2010 Standards contain an exception for accessibility at site arrival points which provides that an ‘‘accessible route shall not be required between site arrival points and the building...
-
Section 36.406(b) Application of Standards to Fixed Elements (Section-by-Section Analysis)
Section 36.406(b) Application of Standards to Fixed Elements (Section-by-Section Analysis) The final rule contains a new Sec. 36.406(b) that clarifies that the requirements established...
-
4 Appendix B to part 36: Analysis and Commentary on the 2010 ADA Standards for Accessible Design
This summary addresses selected substantive changes between the 1991 ADA Standards for Accessible Design (1991 Standards) codified at 28 CFR part 36, app....
-
1.1.8.2 Locally adopted energy standards - California Energy Code, Part 6
In addition to the provisions of Section 1.1.8.1 of this part, the provisions of this section shall apply to a city, county, and city and county adopting local energy standards applicable...
-
1.1.8.2 Locally adopted energy standards - California Energy Code, Part 6.
In addition to the provisions of Section 1.1.8.1 of this part, the provisions of this section shall apply to a city, county, and cities and counties adopting local energy standards applicable...
-
Requirement 2. Accessible and usable public and common use areas.
Guideline The following chart identifies the public and common use areas that should be made accessible, cites the appropriate section of the ANSI Standard, and describes the appropriate...
-
General: ADA Standard Section 410.1
Section 410.1 of the ADA Standards covers information in the current ADA Standards for platform lifts.
-
Pedestrian Signal Phase Timing (Section-by-Section Analysis)
Pedestrian Signal Phase Timing (Section-by-Section Analysis) Pedestrian signal phase timing must comply with referenced MUTCD standards and use a pedestrian clearance time that is calculated...
-
601.1 Scope
requirements in Chapter 6 shall apply to ICT support documentation and services where required by 508 Chapter 2 (Scoping Requirements), 255 Chapter 2 (Scoping Requirements), and where otherwise referenced...
- Stanley QTL 200 Series Grade 2 Standard Duty Tubular Locks
-
216.4.2 Areas of Refuge
required by section 1003.2.13.5.4 of the International Building Code (2000 edition) or section 1007.6.4 of the International Building Code (2003 edition) (incorporated by reference, see "Referenced...
- American Standard Colony Choice 1-Handle Kitchen Faucet 4175.700
- American Standard Monterrey 8" Widespread Faucet, Rigid/Swivel Gooseneck Spout
-
216.4.3 Directional Signs
Signs required by section 1003.2.13.6 of the International Building Code (2000 edition) or section 1007.7 of the International Building Code (2003 edition) (incorporated by reference, see "Referenced...
-
F106.3 Undefined Terms
Services Administration, the Secretary of Defense, the Secretary of Housing and Urban Development, or the United States Postal Service to implement the Architectural Barriers Act or in referenced...
-
601.1 Scope
requirements in Chapter 6 shall apply to ICT support documentation and services where required by 508 Chapter 2 (Scoping Requirements), 255 Chapter 2 (Scoping Requirements), and where otherwise referenced...
-
68.76. Standards of Conduct for the Registered Accessibility Specialist
Standards of Conduct for the Registered Accessibility Specialist....
-
6. Minimum (Low) Height Standard for Transfer Surfaces
Minimum (Low) Height Standard for Transfer Surfaces As indicated in Section 5.1.1, the MDE Advisory Committee recommends that equipment with transfer surfaces be height adjustable in...
-
Current industry standard practices resulting from this project
Current industry standard practices resulting from this project Interlocking Concrete Pavement Institute (ICPI) The ICPI, along with the Brick Industry Association and the National Concrete...
-
810.9 Escalators
Where provided, escalators shall comply with the sections 6.1.3.5.6 and 6.1.3.6.5 of ASME A17.1 (incorporated by reference, see "Referenced Standards" in Chapter 1) and shall have a clear...