MITA Advisory Committee Members MINORITY REPORT ON TRANSFER SURFACE HEIGHT RECOMMENDATIONS OF THE U.S. ACCESS BOARD ADVISORY COMMITTEE RE: NPRM: M301.2.1 AND M302.2.1 HEIGHT...
Search Results "Character Height (Raised)"
Commonly Searched Documents
- 
    
  
  MITA Advisory Committee Members
  
 - 
    
  
  5.1 Transfer Surface Height
  
5.1 Transfer Surface Height...
 - PC 2000 Hi Lo Adult Changing Table
 - 
    
  
  5.1 Transfer Surface Height Recommendations
  
5.1 Transfer Surface Height Recommendations Description: The transfer height is set above the finished floor surface to permit transfers form mobility devices onto the transfer surface...
 - Diversified Woodcrafts 9010 ARM Lab Table Accessory
 - 
    
  
  11B-206.2.5 Restaurants, cafeterias, banquet facilities and bars
  
In restaurants, cafeterias, banquet facilities, bars, and similar facilities, an accessible route shall be provided to all functional areas, including raised or sunken areas, and outdoor...
 - 
    
  
  4.1 Wheeled Mobility Device Dimensions
  
larger than for armrest height and handle height....
 - 
    
  
  F. Counter Height
  
F. Do the registration counters or other counters serving guests have a lowered portion no more than 36" high or is there a folding shelf at 36" high to allow persons who use...
 - 
    
  
  4.3.2 Seat Height
  
4.3.2 Seat Height Seat height is an important dimension for establishing the height of built-in seating, toilet heights, tub heights, shower seat heights and other transfer related surfaces...
 - 
    
  
  11B-411.1.2 Car designations
  
Elevator cars shall be designated with a single alphabetic character....
 - 
    
  
  M301.2.1, M302.2.1 Transfer Height
  
M301.2.1, M302.2.1 Transfer Height Proposed requirement: The height of the transfer surface during patient transfer shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum...
 - 
    
  
  5.1.4 Transfer Surface Height Measurement
  
5.1.4 Transfer Surface Height Measurement....
 - 
    
  
  1013.4 Raised character and braille exit signs
  
1013.4 Raised character and braille exit signs. Tactile exit signs shall be required at the following locations: 1....
 - 
    
  
  H1
  
.), is a sign with raised characters and Braille mounted on the wall adjacent to the latch?...
 - 
    
  
  § 37.42(c)(4)
  
(4) Mini-high platforms, with multiple mini-high platforms or multiple train stops, as needed, to permit access to all accessible cars available at that station; or
 - Seton Economy Braille Signs - Men's Restroom with ISA
 - Seton Economy Braille Signs - Women's Restroom with ISA
 - 703.4.1 Raised Letter and Braille Signage Height
 - 
    
  
  Style: ADA Standard Section 703.5.3
  
Characters shall be conventional in form. Characters shall not be italic, oblique, script, highly decorative, or of other unusual forms....
 - 
    
  
  11B-703.5.3 Style
  
Characters shall be conventional in form. Characters shall not be italic, oblique, script, highly decorative, or of other unusual forms....
 - 
    
  
  11B-406.1 General
  
Curb ramps, blended transitions and islands on accessible routes shall comply with Section 11B-406. Curb ramps may be perpendicular, parallel, or a combination of perpendicular and...
 - 
    
  
  11B-406 CURB RAMPS, BLENDED TRANSITIONS AND ISLANDS
  
11B-406 Curb ramps, blended transitions and islands [2010 ADAS] 406 Curb Ramps ETA Editor's Note The differences between 2010 ADAS Section 406 and 2013 CBC Section...
 - 
    
  
  407.3.1 Tactilely Discernible
  
Input controls shall be operable by touch and tactilely discernible without activation.
 - 
    
  
  Islands [§406.7]
  
Islands [§406.7] A 48” min. long separation is necessary between curb ramps so that people using wheelchairs can clear one ramp before negotiating the next. Level cut-throughs...