with a shorter wheelbase than “standard,” the clearance for a lift may use both the clearance in the base and the clearance around the base to position the lift around the stretcher for patient...
Search Results "ACA: Patient Protection and Affordable Care Act"
-
5.7.1.1 Lift Compatibility Clearance in Base for Stretchers (M301)
-
5.8 Wheelchair Spaces for Diagnostic Equipment Used by Patients Seated in a Wheelchair
5.8 Wheelchair Spaces for Diagnostic Equipment Used by Patients Seated in a Wheelchair....
- Defining and Delivering Disability-Competent Care - Providing Disability-Competent Primary Care
-
M301.2.2 Transfer Surface Size
The minimum size of the transfer surface is 28 inches wide minimum and 21 inches deep minimum and is located such that the long dimension of 28 inches is be located parallel to the patient...
-
5.4.5.1 Transfer and Positioning Support Position Recommendation for Imaging Equipment
5.4.5.1 Transfer and Positioning Support Position Recommendation for Imaging Equipment On imaging equipment, the transfer surface is oriented along the long dimension of the surface where patients...
-
5.9 Standing Support Recommendations for M304 Diagnostic Equipment Used by Patients in a Standing Position
5.9 Standing Support Recommendations for M304 Diagnostic Equipment Used by Patients in a Standing Position Description: Many people who ambulate with a disability need support to maintain...
-
5.4.2.2 Transfer and Positioning Support Length Recommendations for Imaging Equipment with Transfer Surfaces
Recommendations for Imaging Equipment with Transfer Surfaces On imaging equipment with transfer surfaces, the transfer surface is oriented along the long dimension of the surface on which patients...
-
M301.2.1 Transfer Surface Height
Additionally these magnetic fields also preclude use of a patient’s mobility device in the exam room....
-
Sec. 12102. Definition of disability. [Section 3]
As used in this Act:...
-
11B-805.2.1 Hand washing fixtures
Hand washing fixtures shall comply with Section 11B-606.
-
11B-805.2.1 Hand washing fixtures
Hand washing fixtures shall comply with Section 11B-606.
-
Communication Access
Effective Communication - The Department of Justice published revised final regulations implementing the Americans with Disabilities Act (ADA) for Title II (State and local government services...
-
5.4.3 Transfer Support Height for M301 and M302
Access Board is considering whether 6 inches minimum and 19 inches maximum above the transfer surface would be an appropriate height for transfer supports on diagnostic equipment used by patients...
-
§382.3 What do the terms in this rule mean?
In this regulation, the terms listed in this section have the following meanings: [Doc. No. DOT-OST-2004-19482, 73 FR 27665, May 13, 2008, as amended at 78 FR 67914, Nov. 12, 2013]
-
§ 382.5 Definitions
§ 382.5 Definitions. As used in this Part --
-
§ 36.105(a)(2)(i)
(i) The definition of “disability” shall be construed broadly in favor of expansive coverage, to the maximum extent permitted by the terms of the ADA.
-
A. Introduction (Section-by-Section Analysis)
As noted above, the Board is proposing to revise and update both the 508 Standards and 255 Guidelines. The existing standards and guidelines are set forth in two separate regulatory...
-
§ 35.108(a)(2)(i)
(i) The definition of “disability” shall be construed broadly in favor of expansive coverage, to the maximum extent permitted by the terms of the ADA.
-
M301.2.3 Transfer Surface Transfer Sides
The option to transfer will be required only on one long side of the patient scanning/imaging table and not at the “foot” or “head” end of such surfaces....
-
702 Fire Alarm Systems
[See subsections ...]
-
702 Fire Alarm Systems
[See subsections ...]
-
702 Fire Alarm Systems
702 Fire Alarm Systems
-
§ 38.159(c)(4) Ramp barriers
(4) Ramp barriers. Each side of the ramp shall have barriers at least 2 inches (50 mm) high to prevent mobility aid wheels from slipping off.
-
§ 38.83(c)(4) Ramp barriers
(4) Ramp barriers. Each side of the ramp or bridge plate shall have barriers at least 2 inches high to prevent mobility aid wheels from slipping off.
