Transfer support gripping surfaces shall be continuous along their length and shall not be obstructed along their tops or sides....
Search Results "Side Entry"
-
M305.2.6 Gripping Surface
-
M305.2.1.1 End Transfer Supports
Transfer supports for transfer surfaces complying with M301.2.3.1 and M302.2 shall be located on the short side (length) opposite the transfer side....
-
205 and 309 Operable Parts
205 and 309 Operable Parts Section 4.1.3, and more specifically sections 4.1.3(13), 4.27.3, and 4.27.4 of the 1991 Standards, require operable parts on accessible elements, along...
-
5.4.5.1 Transfer and Positioning Support Position for Imaging Equipment
5.4.5.1 Transfer and Positioning Support Position for Imaging Equipment. The transfer or positioning support should be oriented horizontally on imaging equipment with transfer...
-
5.4.2.2 Transfer and Positioning Support Length for Imaging Equipment with Transfer Surfaces
5.4.2.2 Transfer and Positioning Support Length for Imaging Equipment with Transfer Surfaces. Transfer supports for imaging equipment should be 28 inches minimum in length and...
-
i. Medical examination and treatment tables and chairs
i. Medical examination and treatment tables and chairs Healthcare providers use examination and treatment tables and chairs for many different types of medical and dental...
-
Bradley Grab Bars 1 1/2" with Exposed Mounting 817
1-1/2" O.D. Exposed Mounting Heavy Duty Stainless Steel
-
5.4.4 Transfer Support Distance from Transfer Surface Recommendations for M301 and M302
position, and diagnostic equipment used by patients in a seated position: At least one transfer support would be provided on the side of the transfer surface that is 15 inches...
-
11B-804.6.5.1 Side-hinged door ovens
Side-hinged door ovens shall have the work surface required by Section 11B-804.3 positioned adjacent to the latch side of the oven door....
-
11B-804.6.5.1 Side-hinged door ovens
Side-hinged door ovens shall have the work surface required by Section 11B-804.3 positioned adjacent to the latch side of the oven door....
-
Side Approach
Side Approach Clear space for a side approach is specified for units that are free-standing or built-in....
-
Manual Doors and Gates [§404.2]
Manual Doors and Gates [§404.2]
-
1008.4.4 Entry Points and Seats
1008.4.4 Entry Points and Seats....
-
Reach Ranges
The 1991 Standards set the maximum height for side reach at 54 inches above the floor....
-
San Francisco: Accessible Business Entrance Program
The San Francisco Board of Supervisors have passed Ordinance 51-16, focusing on providing accessible business entrances to enable persons with disabilities to gain greater physical...
-
1002.5.3 Transfer Entry
1002.5.3 Transfer Entry....
-
M305.2.2 Length (Section-by-Section Analysis)
The Board restructured the Committee’s recommendations to fit within the end and side transfer supports discussed above....
-
1008.4.4 Entry Points and Seats
Where play components require transfer to entry points or seats, the entry points or seats shall be 11 inches (280 mm) minimum and 24 inches (610 mm) maximum from the clear floor or ground...
-
1008.4.4 Entry Points and Seats
Where play components require transfer to entry points or seats, the entry points or seats shall be 11 inches (280 mm) minimum and 24 inches (610 mm) maximum from the clear floor or ground...
-
Door King Inc. 1803 Telephone Entry System
Two special inputs can be programmed for relay activation or to dial out a preprogrammed phone number. 5-digit entry codes for special needs. Built-in time clock....
-
Figure M3: Overview of M302 Diagnostic Equipment for Use by a Patient in a Seated Position
[See subsections ...]
-
1132A.1 Primary entry doors and required exit doors
1132A.1 Primary entry doors and required exit doors. The width and height of primary entry doors and all required exit doors shall comply with Section 1126A.1....
