Guest rooms required to have accessible communication features are required to have visual alarms....
Search Results "Patient Room"
Filters
Commonly Searched Documents
-
Communication Features in Guest Rooms
-
11B-809.10.8.7 Mirrors and towel bars
Where mirrors are provided the bottom edge of the reflective surface shall be 40 inches (1016 mm) maximum above the finish floor. Where towel bars are provided they shall be...
-
11B-809.10.8.6 Controls
Faucet controls and operating mechanisms shall comply with Section 11B-309.4.
-
11B-803.2 Turning space
Turning space complying with Section 11B-304 shall be provided within the room....
-
11B-803.2 Turning space
Turning space complying with Section 11B-304 shall be provided within the room....
-
11B-803.2 Turning space
Turning space complying with Section 11B-304 shall be provided within the room....
-
803.2 Turning Space
Turning space complying with 304 shall be provided within the room....
-
5.2.2.2 Transfer Surface Depth
The transfer surface should be 17 inches deep minimum for equipment used by patients in a seated position....
-
§104.23(c)(2)
(2) For purposes of this section, section 4.1.6(1)(g) of UFAS shall be interpreted to exempt from the requirements of UFAS only mechanical rooms and other spaces that, because of their intended...
-
Scoping for Guest Rooms
These levels slightly differ from the original ADAAG at the higher levels (401 rooms and above)....
-
Coat Hooks and Shelves: ADA Standard Section 213.3.7
Section 213.3.7 covers scoping requirements in the current ADA Standards for coat hooks and shelves
-
Alterations to Accessible Units, Sleeping Rooms, and Suites [9.1.5]
Alterations to Accessible Units, Sleeping Rooms, and Suites [9.1.5] The minimum number of guest rooms required to be accessible in an alteration is based on the total number of guest...
-
Guest Rooms
Reminder: The requirement for mobility accessible rooms and hearing-impaired accessible rooms are separate requirements allowing for minimal overlap. 806.3 Guest Rooms with Communication...
-
224 and 806 Transient Lodging Guest Rooms
[See subsections ...]
-
11B-806 TRANSIENT LODGING GUEST ROOMS
[See subsections ...]
-
11B-806 Transient lodging guest rooms
[See subsections ...]
-
11B-806 Transient lodging guest rooms
[See subsections ...]
-
5.2.2.1 Transfer Surface Width
The transfer surface should be 21 inches wide minimum for examination chairs and other equipment used by patients in a seated position....
-
M302.3.2 Leg Supports (Section-by-Section Analysis)
The MDE NPRM did not propose to require stirrups to provide a method of supporting, positioning, and securing the patient’s legs for diagnostic equipment used by patients in the seated position...
-
Feature 5 - Temporary Barrier Removal for Meeting Space
Feature 5 - Temporary Barrier Removal for Meeting Space
-
224.4 Guest Rooms with Communication Features
224.4 Guest Rooms with Communication Features....
-
11B-213.3.7 Coat hooks and shelves
Where coat hooks or shelves are provided in toilet rooms without toilet compartments, at least one of each type shall comply with Section 11B-603.4....
-
M301.2.4 Unobstructed Transfer (Section-by-Section Analysis)
The final rule retains the requirement for unobstructed transfer, but has reworded the requirement to specify that each transfer surface must provide two unobstructed sides for the patient...