Single-User Toilet Rooms: No Side Transfer Space On single plumbing walls, lavatories can overlap water closet clear floor space although this precludes side transfers....
Search Results "Patient Room"
Commonly Searched Documents
-
Single-User Toilet Rooms: No Side Transfer Space
-
11B-219 Assistive listening systems
[See subsections ...]
-
11B-219.1 General
Assistive listening systems shall be provided in accordance with Section 11B-219 and shall comply with Section 11B-706.
-
5.1.2 Transfer Surface High Height Recommendations for M301 and M302
Therefore, transfer surfaces that are adjustable to a 25 inches maximum during patient transfer accommodate most patients who use mobility devices....
-
5.4.6 Transfer Support Gripping Surface Cross Section and Clearances for M301, M302, and M305.2
The Access Board is considering whether the above cross section dimensions would be appropriate for the gripping surfaces of transfer supports on diagnostic equipment used by patients in...
-
Armrests (M302.3.2)
M302.3.2 would require armrests to be provided on diagnostic equipment used by patients in a seated position....
-
(1) Transfer Surface Location for Diagnostic Equipment Used in the Supine, Prone, or Side-lying Position
This is because many models of this equipment can be obstructed on the head or foot ends by necessary components such as emergency extraction handles, the gantry design, or integral patient...
-
806.2 Guest Rooms with Mobility Features
Guest rooms required to provide mobility features shall comply with 806.2. Advisory 806.2 Guest Rooms....
-
806.2 Guest Rooms with Mobility Features
Guest rooms required to provide mobility features shall comply with 806.2. Advisory 806.2 Guest Rooms with Mobility Features....
- The Mayer-Rothschild Foundation
-
11B-216.8 Toilet rooms and bathing rooms
Where existing toilet rooms or bathing rooms do not comply with Section 11B-603, directional signs indicating the location of the nearest toilet room or bathing room complying with Section...
-
11B-216.8 Toilet rooms and bathing rooms
Where existing toilet rooms or bathing rooms do not comply with Section 11B-603, directional signs indicating the location of the nearest toilet room or bathing room complying with Section...
-
Question 18
Are accessible public restrooms, toilet stalls, and fitting rooms unlocked when all other facilities are unlocked?...
- Takeform Fusion Signage Miscellaneous Room Identification Type E.3
-
5.1.4 Transfer Surface Height Measurement for M301 and M302
Rationale for final recommendation Having an accessible transfer surface height is critical to facilitate independent patient transfers to equipment used by patients both in a supine,...
-
806.3 Guest Rooms with Communication Features
806.3 Guest Rooms with Communication Features. Guest rooms required to provide communication features shall comply with 806.3....
-
241 and 612 Saunas and Steam Rooms
241 and 612 Saunas and Steam Rooms Section 241 of the 2010 Standards sets scoping for saunas and steam rooms and section 612 sets technical requirements including providing accessible...
-
5.7.1.1 Lift Compatibility Clearance in Base for Stretchers
5.7.1.1 Lift Compatibility Clearance in Base for Stretchers. The base of the equipment must provide a clearance of 39 inches wide minimum.
-
4.23 Bathrooms, Bathing Facilities, and Shower Rooms
[See subsections ...]
-
A4.23 Bathrooms, Bathing Facilities, and Shower Rooms
[See subsections ...]
-
A4.23 BATHROOMS, BATHING FACILITIES, AND SHOWER ROOMS
[See subsections ...]
-
4.23 BATHROOMS, BATHING FACILITIES, AND SHOWER ROOMS
[See subsections ...]
-
M301.3.1 Transfer Supports (Section-by-Section Analysis)
The MDE NPRM proposed to require transfer supports to be provided for use with transfer sides on diagnostic equipment used by patients in the supine, prone, or side-lying position, and that...
-
M301.3.3 Head and Back Support (Section-by-Section Analysis)
In the MDE NPRM the Access Board proposed to place the requirements for head and back support for diagnostic equipment used by patients in the supine, prone, or side-lying position in M301...