Appendix C sets forth proposed functional performance criteria (Chapter 3) and technical requirements (Chapters 4 through 6) that are referenced by, and applied in, the Application...
Search Results "Imaging Equipment with Bores"
Commonly Searched Documents
- 
    
  
  D. Functional Performance Criteria and Technical Requirements (Section-by-Section Analysis)
  
 - 
    
  
  C206 Support Documentation and Services
  
[See subsections ...]
 - 
    
  
  M302.2.3 Transfer Sides
  
The transfer surface shall be located to provide options to transfer from a mobility device onto one short side (depth) and one long side (width) of the surface. Each transfer side...
 - 
    
  
  M303.2.3 Depth
  
Where wheelchair spaces can be entered from the front or rear, the wheelchair space shall be 48 inches (1220 mm) deep minimum. Where wheelchair spaces can be entered only from the...
 - 
    
  
  M303.2.2 Width
  
Wheelchair spaces shall be 36 inches (915 mm) wide minimum.
 - 
    
  
  M305.3.3 Fittings
  
Standing supports shall not rotate within their fittings.
 - 
    
  
  A. Purpose and Legal Authority
  
with accessibility needs, and shall allow independent entry to, use of, and exit from the equipment by such individuals to the maximum extent possible.” 29 U.S.C. 794f....
 - 
    
  
  11B-805 Medical care and long-term care facilities
  
These units are not intended as normal patient toileting facilities but as equipment in support of patient care assessment within an ICU setting....
 - 
    
  
  2. Tips to Improve Access
  
The barriers you find inside a fitness facility can involve the building itself, the equipment, the classes, and staff training and attitudes. ...
 - 
    
  
  405.5 Clear Width
  
EXCEPTION: Within employee work areas, the required clear width of ramps that are a part of common use circulation paths shall be permitted to be decreased by work area equipment provided...
 - 
    
  
  405.5 Clear Width
  
EXCEPTION: Within employee work areas, the required clear width of ramps that are a part of common use circulation paths shall be permitted to be decreased by work area equipment provided...
 - 
    
  
  405.5 Clear Width
  
EXCEPTION: Within employee work areas, the required clear width of ramps that are a part of common use circulation paths shall be permitted to be decreased by work area equipment provided...
 - 
    
  
  (1) Adjustability: Minimum High Transfer Height
  
In the preamble to the MDE NPRM, the Access Board sought comment in question 14 on whether the final rule should require an adjustable height range of 17 inches to 25 inches; whether equipment...
 - 
    
  
  11B-805.7 Built-in cabinets and work surfaces
  
counters and work surfaces shall be accessible, including: patient wardrobes, nurse’s stations, administrative centers, reception desks, medicine preparation areas, laboratory work stations, equipment...
 - 
    
  
  5.8.3 Breast Platform Recommendations
  
clearance at the breast platform (see 5.8.2 Knee and Toe Clearance Recommendations under Breast Platforms), the height of the breast platform is also critical to ensuring that mammography equipment...
 - 
    
  
  5.2.1.3 Transfer Surface Size Recommendations for Stretchers (M301)
  
The point of entry to the equipment is in the center. The length of the stretcher means a patient would transfer on in the middle....
 - IDeA Center: Transferring from Wheeled Mobility to MidMark's Barrier-Free Examining Table
 - Detecto FHD Series Stationary Wheelchair Scale
 - seca 676 r Digital Wheelchair Scale with Handrail and Integrated RS232 Interface
 - seca 664 Digital Wheelchair Scale with Wireless Transmission
 - seca 684 r Digital Multifunctional Scale with Integrated RS232 Interface
 - Detecto 6550 Portable Wheelchair Scale
 - Detecto BRW1000 Portable Wheelchair Scale
 - CPF Challenge App