All fixed route operators providing complementary paratransit must make service available at least to individuals meeting these standards....
Search Results "ANSI: American National Standards Institute"
-
General Provisions
-
11B-707 Automatic teller machines, fare machines and point-of-sale devices
Federal procurement law requires that ITMs purchased by the Federal government comply with standards issued by the Access Board under Section 508 of the Rehabilitation Act of 1973, as amended...
-
11B-806.3 Guest rooms with communication features
For headset or external amplification system compatibility, a standard subminiature jack installed in the telephone will provide the most flexibility....
-
WHEELCHAIR
A chair mounted on wheels to be propelled by its occupant manually or with the aid of electric power, of a size and configuration conforming to the recognized standard models of the trade...
-
11B-810.2.2 Dimensions
Access Board's Note to Reader: The Department of Transportation's ADA Standards indicate that compliance is required to the extent construction specifications are within a public entity's...
-
11B-407.3.4 Door and signal timing
[2010 ADA Standards] 2. Destination-oriented elevators shall not be required to comply with 407.3.4....
-
11B-806.3 Guest rooms with communication features
For headset or external amplification system compatibility, a standard subminiature jack installed in the telephone will provide the most flexibility. ◼...
-
11B-607.2 Clearance
[2010 ADA Standards] 607.2 Clearance. Clearance in front of bathtubs shall extend the length of the bathtub and shall be 30 inches (760 mm) wide minimum....
-
11B-703.4.1 Height above finish floor or ground
[2010 ADA Standards] 703.4.1 Height Above Finish Floor or Ground....
-
11B-705.1.1.2 Dome spacing
[2010 ADA Standards] 705.1.2 Dome Spacing....
-
610.3 Shower Compartment Seats
Where a seat is provided in a standard roll-in shower compartment, it shall be a folding type, shall be installed on the side wall adjacent to the controls, and shall extend from the back...
-
604.2 Location
ETA Editor’s Note: The prior standards allowed construction tolerances to occur on either side of an 18” absolute dimension....
-
806.3 Guest Rooms with Communication Features
For headset or external amplification system compatibility, a standard subminiature jack installed in the telephone will provide the most flexibility....
-
Bradley Fixed Tilt Mirror 740
Fixed tilt mirror Satin finish stainless steel frame Standard 6° angle to wall Welded corners Standard sizes available BradEX...
-
Norton Surface Mounted 5900 Series Low Energy Door Operator
This cost-effective operator is available for either push- or pull-side mounting and is ideal for any application designed to meet the Americans with Disabilities Act (A.D.A)....
-
Evaluating Leadership Styles and Their Impact on Healthcare Team Performance
By recognizing and rewarding effective leadership behaviors, healthcare institutions can encourage the adoption of positive leadership styles....
-
1. Captioning and Audio Description for Analog Movies
According to comments from the WGBH National Center for Accessible Media (NCAM), as of mid-2010, MoPix® systems had been installed in more than 400 screens in the United States and Canada...
-
Brewer Access™ High-Low Exam Table
Brewer's Access™ High-Low Exam Table design provides an 18" profile in the seated position to allow level transfer from standard wheelchair heights, complete with upright seat back and safety...
-
Corada's ADA Product Certification FAQs
The Corada Product Certification program offers three levels of certification, Standard, Silver, and Platinum....
-
Coordination of Overlapping Federal Requirements
The ADA directs the agencies with enforcement authority for these legal requirements to coordinate their activities to prevent duplication and avoid conflicting standards....
-
a. Transfer Surface Adjustability
The Access Board sought public comment in the MDE NPRM preamble on whether the final standards should require the height of the transfer surface to be adjustable from 17 inches minimum to...
-
UNREASONABLE HARDSHIP
When the enforcing agency finds that compliance with the building standard would make the specific work of the project affected by the building standard infeasible, based on an overall evaluation...
-
Picnic Tables [1011.2 and 1011.4]
The wheelchair space must be positioned for a forward approach and provide knee and toe clearance under the table that complies with section 306 of the ABA Standards....
-
Relationship to Other Laws
Except as otherwise provided in this part, this part shall not be construed to apply a lesser standard than the standards applied under title V of the Rehabilitation Act of 1973, 29 U.S.C...
