shall be considered feasible to remanufacture an OTRB so as to be readily accessible to and usable by individuals with disabilities, including individuals who use wheelchairs, unless an engineering...
Search Results "IETF: Internet Engineering Task Force"
-
§ 37.197(c)
-
Section 5 References
References i http://udeworld.com/analysis-of-seat-height-for-wheeled-mobility-devices ii ”The Impact of Transfer Setup on the Performance of Independent Transfers: Final Report”; Human Engineering...
-
Using a Fitness Center Does Not Have to be an Exercise in Frustration: Tips for People with Mobility and Visual Disabilities
Director Center for Disability Issues and the Health Professions Western University of Health Sciences jik@pacbell.net Version 1.1, November 2008 The Rehabilitation Engineering...
-
11B-809.10.7.5 Controls
The force required to activate controls shall be 5 pounds (22.2 mm) maximum....
-
a. Structural Strength
The MDE NPRM proposed to require transfer supports to be capable of resisting vertical and horizontal forces of 250 pounds at all points (proposed M305.2.2)....
-
106.5.78 Work Area Equipment
Any machine, instrument, engine, motor, pump, conveyor, or other apparatus used to perform work....
-
§100.201a(b)(4) ANSI A117.1-1986
American National Standard for Buildings and Facilities: Providing Accessibility and Usability for Physically Handicapped People, 1986 edition, (ANSI A117.1-1986) may be obtained from Global Engineering...
-
§ 37.89(c)
feasible to remanufacture an intercity or commuter rail car so as to be readily accessible to and usable by individuals with disabilities, including individuals who use wheelchairs, unless an engineering...
-
Proceedings of: Workshop on Improving Building Design for Persons with Low Vision
Until his retirement in January 2011, he was the Chief Mechanical Engineer in the Office of Design and Construction for the Public Buildings Service of the U.S....
-
Web Accessibility 101: Dragon NaturallySpeaking Demonstration Video
Thomas Logan, Senior Accessibility Consultant for SSB BART Group, demonstrates the use of Dragon NaturallySpeaking speech recognition software to perform basic tasks including completing...
-
4.26.3 STRUCTURAL STRENGTH
(3) Shear force induced in a fastener or mounting device from the application of 250 lbf (1112N) shall be less than the allowable lateral load of either the fastener or mounting device...
-
Watch people with various disabilities reacting to inaccessible websites
This video features people with various disabilities explaining the difficulties they experience trying to access the internet, and shows them as they react in real time to inaccessible...
-
J4
Does the water rise at least 4 inches high when no more than 5 pounds of force is applied to the controls of the fountain? [ADA Standards §§ 4.15.3 and 4.15.4] Yes No...
-
POWER-ASSISTED DOOR
[DSA-AC] A door used for human passage with a mechanism that helps to open the door, or relieves the opening resistance of a door, upon the activation of a switch or a continued force applied...
-
POWER-ASSISTED DOOR
[DSA-AC] A door used for human passage with a mechanism that helps to open the door, or relieves the opening resistance of a door, upon the activation of a switch or a continued force applied...
-
9.2* POST OFFICE LOBBIES
(1) All fixed partitions must be installed to withstand a 250-pound force applied at any point and from any direction....
-
Customer Premises Equipment (CPE)
Examples of CPE are telephones, routers, switches, residential gateways, set-top boxes, fixed mobile convergence products, home networking adaptors and Internet access gateways which enable...
-
Section 1630.2(j)(1)(viii) Substantial Limitation in Only One Major Life Activity Required
In addition, this rule of construction is “intended to clarify that the ability to perform one or more particular tasks within a broad category of activities does not preclude coverage under...
-
11B-610.4 Structural strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or...
-
903.6 Structural Strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or...
-
610.4 Structural Strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or...
-
610.4 Structural Strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or...
-
903.6 Structural Strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or...
-
903.6 Structural Strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or...
