Where a building contains more than one assembly area and the assembly areas required to provide assistive listening systems are under one management, the total number of required receivers...
Search Results "Fire-Building Surface"
Filters
Commonly Searched Documents
-
11B-219.3 Receivers
-
UNREASONABLE HARDSHIP
When the enforcing agency finds that compliance with the building standard would make the specific work of the project affected by the building standard infeasible, based on an overall evaluation...
-
Cost Estimates for Barrier Removal
Quality Factor adjusts for average quality of facilities 1.00 Domino Effect adjustment factor These estimates would include any contingencies for the effects of: Building...
-
Portable tactile maps
These are accessible representations of building and campus layouts available to visitors on demand. Usually, these maps are provided in multi-page booklets....
-
11B-216.6 Entrances
In existing buildings and facilities where not all entrances comply with Section 11B-404, entrances complying with Section 11B-404 shall be identified by the International Symbol of Accessibility...
-
11B-206.4.1 Entrances and exterior ground floor exits
All entrances and exterior ground-floor exits to buildings and facilities shall comply with Section 11B-404. [2010 ADAS] 206.4.1 Public Entrances. ...
-
11B-219.3 Receivers
Where a building contains more than one assembly area and the assembly areas required to provide assistive listening systems are under one management, the total number of required receivers...
-
11B-219.3 Receivers
Exceptions: Where a building contains more than one assembly area and the assembly areas required to provide assistive listening systems are under one management, the total number...
-
11B-206.4.1 Entrances and exterior ground floor exits
All entrances and exterior ground-floor exits to buildings and facilities shall comply with Section 11B-404. [2010 ADA Standards] 206.4.1 Public Entrances....
-
Bradley Towel Dispenser 250-33
Surface Mounted C-Fold/Multi-Fold Towels White Enamel Finish Stainless Steel...
-
American Standard Cadet 1.1 gpf FloWise Right Height Pressure Assisted Elongated Toilet 2467136
low consumption (1.1gpf/4.2Lpf), utilizes 31% less water Meets EPA WaterSense® criteria Combination bowl and tank, less seat 12" (305mm) rough EverClean® Surface...
-
Willoughby Industries 2260 AquaDeck Lavatory Deck Contoured Front
Contoured front solid surface lavatory deck Willoughby AquaDeck Model No....
-
11B-704.4.1 Height
When in use, the touch surface of TTY keypads shall be 34 inches (864 mm) minimum above the finish floor. [S.H. ...
-
Sections 505.10.2 and 505.10.3
Commenters noted that the 2010 Standards will require handrail gripping surfaces with a circular cross section to have an outside diameter of 2 inches, and that this requirement would impose...
-
Q5: Effective Date for Public Entities to Comply
This technical assistance was provided to respond to questions that arose largely due to the development of a variety of road surface treatments, other than traditional road resurfacing,...
-
G. What are Detectable Warnings, Why are They Required, and Where Must They be Provided?
They must be integrated into the walking surface, and there are specific measurements for the size and spacing of the domes.13 What is the function of detectable warnings?...
-
604.7 Dispensers
paper dispensers are installed above the side wall grab bar, the outlet of the toilet paper dispenser must be 48 inches (1220 mm) maximum above the finish floor and the top of the gripping surface...
-
Baby Changing Tables
In addition, convenience fixtures, such as baby changing tables, must be accessible to persons with disabilities under scoping provisions for operable parts (205) and work surfaces (226)...
-
M303.2.2 Width (Section-by-Section Analysis)
an exception in the final rule that permits wheelchair spaces on raised platforms to be 32 inches wide minimum with edge protection no higher than 4 inches, measured from the platform surface...
-
Technical Memorandum TM 2013-22 Storage (Kitchens and Kitchenettes)
Counter surfaces shall not be considered shelf space nor used to satisfy the requirements of 804.5....
-
1017.4 Passing Spaces
at shorter intervals if the clear tread width is less than 60 inches (1525 mm), where a trail is: --Heavily used; or --A boardwalk or otherwise not at the same level as the ground surface...
-
5.8.1.2 Entry to Wheelchair Spaces on Raised Platforms
5.8.1.2 Entry to Wheelchair Spaces on Raised Platforms Recommendations Description: Entry to wheelchair spaces on raised surfaces greater than ¼ inch in height requires a transition...
-
CONTENTS
Increasing number of Health Care Providers are Transitioning to Adjustable Height Tables Available data do not support departing from the currently accepted standard of 19-Inch transfer surface...
-
Disorienting Spaces (slide 7)
It’s actually a flat surface, and then going into the lovely, also very easy-to-navigate checkerboard flooring pattern....
