Where an addition to an existing building results in an increase in the number of residential dwelling units, the requirements of 233.3.1 shall apply only to the residential dwelling units...
Search Results "Fire-Building Surface"
Filters
Commonly Searched Documents
-
11B-233.3.3 Additions
-
1009.1 Accessible means of egress required
In addition to the requirements of this chapter, means of egress, which provide access to, or egress from, buildings for persons with disabilities, shall also comply with the requirements...
-
American Standard Acrylic Shroud for American Standard Selectronic Faucets
Acrylic material with aesthetically pleasing design Designed to conceal Selectronic control box, thermostatic mixing valve, p-trap and water lines EverClean® Antimicrobial surface...
-
Bradley Adjustable Tilt Mirror 782
Model 782 Series Satin finish Stainless Steel Frame Adjustable Tilt Mounting Welded Corners Alternate reflective surfaces available...
-
American Specialties Omara Collection Spare Toilet Paper Roll Holder 7316
All exposed surfaces have a satin finish....
-
AJW Architectural Products U2304 Unidoor C-fold/Multifold Towel Dispenser - Recessed
Uni-Door: Fabricated of #18 ga stainless steel with a #4 satin finish & 1/2" returns to wall surface....
-
AJW Architectural Products U2314 Unidoor C-fold/Multifold Towel Dispenser - Recessed
Uni-Door: Fabricated of #18 ga stainless steel with a #4 satin finish with 1/2" returns to wall surface....
-
ADA Title III: Public Accommodations
They also must comply with specific requirements related to architectural standards for new and altered buildings; reasonable modifications to policies, practices, and procedures; effective...
-
Triggering event
One commenter argued that the Department should use the “last building permit or start of physical construction, whichever comes first,’’ stating that “altering a design after a building...
-
Accessible Routes Throughout the Museum
If directional signs to accessible building features are mounted on movable pedestals, they must be monitored to ensure they are in place and continue to provide correct directions...
-
Triggering event. (Section-by-Section Analysis)
One commenter argued that the Department should use the ‘‘last building permit or start of physical construction, whichever comes first,'' stating that ‘‘altering a design after a building...
-
VALUATION THRESHOLD
the annually-updated figure used when determining path of travel accessibility requirements in alterations, additions and structural repair construction projects regulated by California Building...
-
XI. Overview of Americans with Disabilities Act Accessibility Guidelines for New Construction and Alterations
The Guidelines contain general design ("technical") standards for building and site elements, such as parking, accessible routes, ramps, stairs, elevators, doors, entrances, drinking fountains...
-
B. JURISDICTION
Any new construction or alteration to any buildings or facilities including exhibitions, must be made in such a manner that those buildings or facilities meet the requirements of title III...
-
Standards Development
Buildings will be certified based on the incorporation of universal design features. Designers will be accredited through an educational program....
-
Section 37.9 Standards for Transportation Facilities
For example, if an entity used a Federal grant or loan or money to make changes to a building, it would already have had to comply with the Uniform Federal Accessibility Standards....
-
308.3.2 Obstructed High Reach
Operable parts of fuel dispensers shall be permitted to be 54 inches (1370 mm) maximum measured from the surface of the vehicular way where fuel dispensers are installed on existing curbs...
-
106.5.45 Primary Function
a primary function include, but are not limited to: (i) Remodeling merchandise display areas or employee work areas in a department store; (ii) Replacing an inaccessible floor surface...
-
G. Sleeping Areas
Accessible cots have a sleeping surface at approximately the same height above the floor as the seat of a wheelchair (17 to 19 inches above the floor)....
-
308.3.2 Obstructed High Reach
Operable parts of fuel dispensers shall be permitted to be 54 inches (1370 mm) maximum measured from the surface of the vehicular way where fuel dispensers are installed on existing curbs...
-
F216.13 Trailhead Signs
The technical requirements in 1017.11 require the signs to include information on the length of the trail or trail segment; surface type; typical and minimum tread width; typical and minimum...
-
1016.1 General
The technical requirements address the surface of outdoor recreation access routes, passing spaces, and resting intervals (1016.2); the clear width of outdoor recreation access routes (1016.3...
-
Suggested best practices for architects and other design professionals
architects and other design professionals As the construction industry works to develop standards for construction tolerances related to specific materials and applications for accessible surfaces...
-
Signage
Signs should not be made of reflective materials such as brass, silver, gold, glass, or mirrored surfaces unless there is an additional properly located sign that complies with the Standards...
