BS8300:2001 Research Annex D and E to the BS8300:2001 Standard includes informative charts and tables from the results of research commissioned to obtain information on anthropometry of wheeled...
Search Results "Wheel Stop"
-
BS8300:2001 Research
-
4.14.1 Minimum Number
Such entrances shall be connected by an accessible route to public transportation stops, to accessible parking and passenger loading zones, and to public streets or sidewalks if available...
-
4.1.6(4)(d)
(i) Where existing elements prohibit strict compliance with the clearance requirements of 4.13.5, a projection of 5/8 in (16 mm) maximum will be permitted for the latch side door stop....
-
4.14.1 MINIMUM NUMBER
Such entrances shall be connected by an accessible route to public transportation stops, to accessible parking and passenger loading zones, and to public streets or sidewalks if available...
-
DRIVE-UP ELECTRIC VEHICLE CHARGING STATION
An electric vehicle charging station in which use is limited to 30 minutes maximum and is provided at a location where the electric vehicle approaches in the forward direction, stops in...
-
DRIVE-UP ELECTRIC VEHICLE CHARGING STATION
An electric vehicle charging station in which use is limited to 30 minutes maximum and is provided at a location where the electric vehicle approaches in the forward direction, stops in...
-
11B-810.4 Bus signs
Exception: Bus schedules, timetables and maps that are posted at the bus stop or bus bay shall not be required to comply....
-
AccessRec All Terrain PVC Beach Chairs
Our two chairs are made of durable PVC construction and non-corrosive wheels....
-
Where Required: Site Arrival Points [§206.2.1]
from these site arrival points, where provided: accessible parking and accessible passenger loading zones public streets and sidewalks each public transportation stop...
-
Vertical Alignment-Crest Vertical Curves
The minimum length for a crest vertical curve is a function of the stopping sight distance, the algebraic difference in the upgrade and downgrade grades, the assumed height of an object...
-
11B-404.2.4.2 Doorways without doors or gates, sliding doors, and folding doors
DOORS MINIMUM MANEUVERING CLEARANCE Approach direction Perpendicular to doorway Parallel to doorway (beyond stop...
-
4.10.12(3)
Emergency controls, including the emergency alarm and emergency stop, shall be grouped at the bottom of the panel and shall have their centerlines no less than 35 in (890 mm) above the finish...
-
1. Introduction
Maybe you joined a fitness center in the past but did not know how to deal with the barriers you experienced, so you stopped going....
-
5.2 FOOD SERVICE LINES
Food service lines shall have a minimum clear width of 36 in (915 mm), with a preferred clear width of 42 in (1065 mm) where passage of stopped wheelchairs by pedestrians is desired....
-
SPOKES Unlimited
The name SPOKES comes from the belief that peer support and the sharing of information will eliminate the need to reinvent the wheel....
-
R208 Detectable Warning Surfaces (Section-by-Section Analysis)
Detectable warning surfaces must be provided at the following locations on pedestrian access routes and at transit stops: Curb ramps and blended transitions at pedestrian street...
-
Irwin Seating Company ADA Transfer Arm
Flip-up armrest to accommodate someone transferring from a wheel chair to the chair. Ends are provided with a recognizable ADA label....
-
Free-Standing Overhead Lifts
While not as portable as floor lifts with wheels, these lifts are movable and can be relocated as needs or services change. 3....
-
Definition of Segway and Scope of Interim Policy
Definition of Segway and Scope of Interim Policy A Segway is a two-wheeled, gyroscopically stabilized, battery-powered personal transportation device. ...
-
A4.5.3 Carpet
Carpeting designed with a weave that causes a zig-zag effect when wheeled across is strongly discouraged....
-
Roughness Measurement
The surface profiles were measured with a custom-built pathway measurement tool (PathMeT), which was created from a power WC frame that was instrumented with a wheel encoder and an Acuity...
-
1014.2.1 Transfer Access
These requirements enable individuals who use wheeled mobility devices to transfer from their mobility device to the shelter floor...
-
1.1.16 Alternate measurement tools
The waviness index method is described in ASTM E 1486, Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria....
-
WHEELCHAIR
A chair mounted on wheels to be propelled by its occupant manually or with the aid of electric power, of a size and configuration conforming to the recognized standard models of the trade...
