Section 504.2 covers the current ADA Standards for the treads and risers on stairways.
Search Results "Curved Stair"
Commonly Searched Documents
-
Treads and Risers: ADA Standard Section 504.2
-
210 and 504 Stairways
The 2010 Standards, at sections 210.1 and 504, require all newly constructed stairs that are part of a means of egress to comply with the requirements for accessible stairs, which include...
-
Problem Three (Protruding Objects)
Problem Three: The bottom of a set of stairs is open and voters who are blind or have vision loss can hit their head on the underside of the stairs....
-
11B-405.7 Landings
Circular or curved ramps continually change direction....
-
405.7 Landings
Circular or curved ramps continually change direction....
-
11B-203.10 Raised refereeing, judging, and scoring areas
An accessible route complying with Division 4 shall be provided to the ground- or floor-level entry points, where provided, of stairs, ladders, or other means of reaching the raised elements...
-
3104.2 Separate structures
… [DSA-AC and HCD 1-AC] For purposes of accessibility in residential facilities as required by Chapters 11A and 11B, structurally connected buildings, buildings connected by stairs...
-
C2‒2
Are the undersides of exterior stairs enclosed or protected with a cane-detectable barrier so that people who are blind or have low vision will not hit their heads on the underside?...
- Bradley Verge Lavatory Systems
-
505 Handrails
Specifications for handrails in section 505 apply to those provided at ramps, stairs, and along walking surfaces....
-
§ 37.42(f)
part, level-entry boarding means a boarding platform design in which the horizontal gap between a car at rest and the platform is no more than 10 inches on tangent track and 13 inches on curves...
-
§ 37.42(f)
part, level-entry boarding means a boarding platform design in which the horizontal gap between a car at rest and the platform is no more than 10 inches on tangent track and 13 inches on curves...
-
Fire Safety Evacuation Planning
Mobility aids, such as emergency stair travel devices, also known as evacuation chairs, are available to transport people unable to use stairs....
-
1015.2 Where required
Guards shall be located along open-sided walking surfaces, including mezzanines, equipment platforms, aisles, stairs, ramps and landings that are located more than 30 inches (762 mm) measured...
-
RISER
The upright part between two adjacent stair treads, between either an upper or lower landing and an adjacent stair tread, or between two adjacent landings....
-
Stairways [ADA Standards §210, §504]
In addition, interior and exterior stairs that are part of a means of egress must comply with requirements in the ADA Standards (§504)....
-
Emergency Evacuation Planning Guide For People with Disabilities
CONTAINS PROVISIONS FOR THOSE WITH: Mobility Disabilities • Blind or Low Vision • Deaf or Hard of hearing • Speech Disabilities • Cognitive...
- Stryker Evacuation Chair 6253
-
4.1.6(1)(d)
For example, if the elevators and stairs in a building are being altered and the elevators are, in turn, being made accessible, then no accessibility modifications are required to the stairs...
-
11B-206.2.3.2 Distance to Elevators
which exceed 10,000 square feet (929 m2) on any floor, an accessible means of vertical access via ramp, elevator or lift shall be provided within 200 feet (60,960 mm) of travel of each stair...
-
11B-206.2.3.2 Distance to Elevators
which exceed 10,000 square feet (929 m2) on any floor, an accessible means of vertical access via ramp, elevator or lift shall be provided within 200 feet (60,960 mm) of travel of each stair...
-
11B-206.2.3.2 Distance to Elevators
which exceed 10,000 square feet (929 m2) on any floor, an accessible means of vertical access via ramp, elevator or lift shall be provided within 200 feet (60,960 mm) of travel of each stair...
-
R409.3 Continuity
Handrails shall be continuous within the full length of each ramp run or stair flight....
-
Surface discontinuities
Elevation changes due to ramps or stairs do not, themselves, constitute surface discontinuities....