How users with disabilities will perform the functions supported by the ICT; and b. How the ICT will be installed, configured, and maintained to support users with disabilities....
Search Results "Back Support"
Filters
Commonly Searched Documents
-
E203.2 Agency Business Needs
-
608.3.1 Transfer Type Shower Compartments
In transfer type compartments, grab bars shall be provided across the control wall and back wall to a point 18 inches (455 mm) from the control wall....
-
§ 37.42(e)(1)
) Except as provided in paragraph (e)(2) of this paragraph, any obstructions on a platform (mini-high platforms, stairwells, elevator shafts, seats etc.) shall be set at least six feet back...
-
§ 37.42(e)(1)
) Except as provided in paragraph (e)(2) of this paragraph, any obstructions on a platform (mini-high platforms, stairwells, elevator shafts, seats etc.) shall be set at least six feet back...
-
4.4.4 Clear Floor or Ground Space
Shoulder alignment generally can be achieved by positioning the back of the bench so it is 8 inches (200 millimeters) closer to the outdoor recreation access route, trail, or beach access...
-
11B-407.4.1 Car dimensions
407.4.1 ELEVATOR CAR DIMENSIONS MINIMUM DIMENSIONS Door Location Door clear width Inside car, side to side Inside car, back...
-
3. How can state and local governments’ employment service systems ensure that people with disabilities have access to competitive integrated employment?
Supported employment can include various services based on the individualized needs of workers with disabilities to support their entrance into and ongoing sustainability in competitive...
-
5.8.1.2.2 Single Ramped Entry – Edge Protection on the Platform and Platform Sides
A 2 inch high edge protection must be provided on the back of the platform, opposite the entry ramp and a minimum 2 inch high edge protection on the sides of the platform....
-
Controls and form elements
See ‘Agency Guide: Alternative text for links, controls and form elements’ (a link to the guide is provided in the back pages of this document) for. ...
-
5.3.3.3 Location Where Walls Not Provided
The back of the seat shall be flush against the perimeter of the clear floor or ground space....
-
5.3.3.3 Location Where Walls Not Provided
The back of the seat shall be flush against the perimeter of the clear floor or ground space. ...
-
Extensions
Extensions at the top provide support before the first step is made. The bottom extension is especially important in providing this support until one is fully vertical....
-
Stadium-Style Movie Theaters
where the vertical viewing angles are between the 40th and 100th percentile of vertical viewing angles for all seats in that theater as ranked from the first row (1st percentile) to the back...
-
Armrests (M302.3.2)
This is consistent with ANSI/AAMI HE75 which recommends that “[f]or support surfaces that require the patient to assume a seated position, armrests should be provided to enhance patient...
-
11B-302.2 Carpet
Carpet or carpet tile shall be securely attached and shall have a firm cushion, pad, or backing or no cushion or pad....
-
11B-302.2 Carpet
Carpet or carpet tile shall be securely attached and shall have a firm cushion, pad, or backing or no cushion or pad....
-
11B-302.2 Carpet
Carpet or carpet tile shall be securely attached and shall have a firm cushion, pad, or backing or no cushion or pad....
-
3.3.2 Experienced Clinicians
Because exam chairs have up-right back support, armrests, and patients do not typically need to reposition their entire body once on the equipment, a narrower minimum width of 21” is proposed...
-
608.3.1 Transfer Type Shower Compartments
In transfer type compartments, grab bars shall be provided across the control wall and back wall to a point 18 inches (455 mm) from the control wall....
-
H22
Is a second horizontal grab bar at least 36 inches long securely mounted on the back wall with one end no more than 6 inches from the side wall 33 to 36 inches above the floor?...
-
M19
Is a horizontal grab bar at least 40 inches long securely mounted on the adjacent side wall 33 to 36 inches above the floor with one end no more than 12 inches from the back wall?...
-
Moving to the House Floor
By having a Democrat such as Chapman lead the charge, supporters of the amendment might counter the perception that it was a Republican amendment and enlist the support of more Democrats...
-
Lifting Capacity
Lifting Capacity Lifts must have the capability of supporting a minimum weight of 300 pounds and be capable of sustaining a static load that is at least 1.5 times the rated load....
-
E203.2 User Needs
How users with disabilities will perform the functions supported by the ICT; and B....