Rail platforms shall not exceed a slope of 1:48 in all directions....
Search Results "9-1-1 Service"
Filters
Commonly Searched Documents
-
810.5.1 Slope
-
503.4 Floor and Ground Surfaces
[ECTCR UFAS 4.6.5] EXCEPTION: Slopes not steeper than 1:48 shall be permitted....
-
11B-804.6.2 Operable parts
Exceptions: 1. Appliance doors and door latching devices shall not be required to comply with Section 11B-309.4. 2. ...
-
810.9 Escalators
Where provided, escalators shall comply with the sections 6.1.3.5.6 and 6.1.3.6.5 of ASME A17.1 (incorporated by reference, see "Referenced Standards" in Chapter 1) and shall have a clear...
-
1630.3(c)
for a covered entity to adopt or administer reasonable policies or procedures, including but not limited to drug testing, designed to ensure that an individual described in paragraph (b)(1)...
-
F207.2 Platform Lifts
International Building Code (2000 edition and 2001 Supplement) or section 1007.5 of the International Building Code (2003 edition) (incorporated by reference, see "Referenced Standards" in Chapter 1)...
-
Sec. 469.003(d)
(d) If any portion of a building described by Subsection (a)(1) is occupied solely for residential use and the remaining occupied portion of the building is occupied for nonresidential use...
-
810.9 Escalators
Where provided, escalators shall comply with the sections 6.1.3.5.6 and 6.1.3.6.5 of ASME A17.1 (incorporated by reference, see "Referenced Standards" in Chapter 1) and shall have a clear...
-
605.2 Height and Depth
Urinals shall be 13 1/2 inches (345 mm) deep minimum measured from the outer face of the urinal rim to the back of the fixture....
-
207.2 Platform Lifts
International Building Code (2000 edition and 2001 Supplement) or section 1007.5 of the International Building Code (2003 edition) (incorporated by reference, see "Referenced Standards" in Chapter 1)...
-
Technical Memorandum TM 2013-17 Water Closet Clearance - Overlap
TM 2013-17 Water Closet Clearances - Overlap Effective Date: June 1, 2013 2012 TAS Reference: 604.3.2 Based on TAS 106.3 and the application of terms and definitions in...
-
Section 3. Fair Housing Act Design and Construction Requirements
A reprint of §100.205 was included to provide easy reference to (1) the Act's accessibility requirements, as codified by §100.205; and (2) the additional examples of methods of compliance...
-
12148(a)(2) Exception
(2) Exception Paragraph (1) shall not require a public entity to make structural changes to existing facilities in order to make such facilities accessible to individuals who use wheelchairs...
-
12186(b) Other provisions
(b) Other provisions Not later than 1 year after July 26, 1990, the Attorney General shall issue regulations in an accessible format to carry out the provisions of this subchapter not...
-
[ADA Title III] Commerce
. [§36.104] Travel, trade, traffic, commerce, transportation, or communication – (1) Among the several States; (2) Between any foreign country or any territory or possession...
-
A5. Accessible Parking Spaces
Are all accessible parking spaces, including the access aisle, relatively level (1:50 or 2%) in all directions?...
-
1018.6 Openings
This section requires openings in the surface of beach access routes and resting intervals such as spaces between boards to not allow passage of a sphere more than 1/2 inch in diameter....
-
§ 38.23(c)(2) Ramp surface
The ramp surface shall be continuous and slip resistant; shall not have protrusions from the surface greater than 1/4 inch high; shall have a clear width of 30 inches; and shall accommodate...
-
11B-608.9 Shower floor or ground surface
Floor or ground surfaces of showers shall comply with Section 11B-302.1 and shall be sloped 1:48 maximum in any direction....
-
[ADA Title III] Commerce
. [§36.104] Travel, trade, traffic, commerce, transportation, or communication – (1) Among the several States; (2) Between any foreign country or any territory or possession and any...
-
11B-804.6.2 Operable parts
Exceptions: 1. Appliance doors and door latching devices shall not be required to comply with Section 11B-309.4. 2....
-
§ 38.83(c)(2) Ramp surface
The ramp or bridge plate surface shall be continuous and slip resistant, shall not have protrusions from the surface greater then 1/4 inch, shall have a clear width of 30 inches, and shall...
-
11B-307.3.1 Edges and corners
edges are less than 80 inches (2032 mm) above the floor or ground surface, the edges of such signs and objects shall be rounded or eased and the corners shall have a minimum radius of 1/...
-
11B-307.3.1 Edges and corners
edges are less than 80 inches (2032 mm) above the floor or ground surface, the edges of such signs and objects shall be rounded or eased and the corners shall have a minimum radius of 1/...