Can a transfer platform be an irregular shape as long as it incorporates the minimum rectangle of 14 by 24 inches? Yes....
Search Results "Transfer Surface Height"
Filters
Commonly Searched Documents
-
10. Can a transfer platform be an irregular shape as long as it incorporates the minimum rectangle of 14 by 24 inches?
-
4.35.4 Bench
Clear floor space shall be provided alongside the bench to allow a person using a wheelchair to make a parallel transfer onto the bench....
-
226 Dining Surfaces and Work Surfaces
Provisions for access to dining and work surfaces have been revised to: further define dining surfaces as those used "for the consumption of food or drink" (226.1) clarify...
-
M305.2.6 Gripping Surfaces (Section-by-Section Analysis)
The proposed rule did not provide any specific requirements regarding gripping surfaces on transfer supports....
-
606.3 Height
Lavatories and sinks shall be installed with the front of the higher of the rim or counter surface 34 inches (865 mm) maximum above the finish floor or ground....
-
Surfaces: ADA Standard Section 505.8
Section 505.8 covers the current ADA Standards for handrail gripping surfaces and also any adjacent surfaces to them.
-
Grab Bars: ADA Standard Section 1009.5.7
At least one grab bar on each transfer step and the transfer platform or a continuous grab bar serving each transfer step and the transfer platform shall be provided....
-
11B-1009.5.7 Grab bars
At least one grab bar on each transfer step and the transfer platform or a continuous grab bar serving each transfer step and the transfer platform shall be provided....
-
Clearances Around Gripping Surfaces
Guidelines specify the following clearances around grab bars to ensure sufficient space for a person to grasp the grab bar: 1ยฝ inches absolute clearance between grab bars and the adjacent wall surfaces...
-
M301.2.2, M302.2.2 Transfer Size
M301.2.2, M302.2.2 Transfer Size Proposed requirement: 30" wide minimum and 15" deep minimum โข Sub-Committee Recommendation: 28" wide minimum and 17" deep minimum....
-
Smith Carrel Hi-Lo Study Carrel - "The Original"
The Hi-Lo Carrel, 30"D x 32 1/2"W, adjusts from a user friendly keyboard height of 27" to a standing Kiosk height of 39" in 1" increments....
-
M301.2.2 Size
The transfer surface shall be 30 inches (760 mm) wide minimum and 15 inches (381mm) deep minimum. Advisory M301.2.2 Size....
-
TRANSFER STALLS
[See subsections ...]
-
Surface and Slope [1012.4 and 1012.5]
The surface of parking spaces and pull-up spaces for RVs must be firm and stable....
-
Smith System Flex Single-Student Desk with Hard Plastic Top - 01369
It takes less flexing to get in and out of a spacious, stable Flex Desk. Its design moves the support away from the corners so the student has more knee room for easier...
-
Smith System Planner Access Station 24โณ Deep Table
Provides maximum strength and stability for two students and computers, plus great security for cables and wires thanks to a locking wireway. Comes with backpack pegs. Choose from 10...
-
Smith System Flex Single-Student Desk 01368 & 01371
It takes less flexing to get in and out of a spacious, stable Flex Desk. Its design moves the support away from the corners so the student has more knee room for easier...
-
Mockett TLKNB27 Original Kyros Leg 5" Base
A heavy duty adjustable leg, our "Original" Kyros features serrated 4 5/16" round leg with triangular insert adjustable from 27" to 34 1/2". Comes with a 5" base. Weight...
-
Installation Height and Location: ADA Standard Section 703.4
Signs with tactile characters shall comply with 703.4.
-
ยง 38.95(b)(6) Platform surface
(6) Platform surface. The lift platform surface shall be free of any protrusions over 1/4 inch high and shall be slip resistant....
-
Dining Surface and Work Surface
Commenters expressed concern about use of the terms "dining surfaces" and "work surfaces" and urged the Board to include definitions of the terms in the final rule....
-
1008.2.5.3.2 Handrail Height
1008.2.5.3.2 Handrail Height. The top of handrail gripping surfaces shall be 20 inches (510 mm) minimum and 28 inches (710 mm) maximum above the ramp surface....
-
Grab Bar Height
Commenters pointed out the proposed rule was not clear on whether the height of grab bars was to be measured to the top or to the centerline. Response....
-
1002.5.3 Transfer Entry
1002.5.3 Transfer Entry....
