The ADAAG standard now in effect provides that ATM's must meet the requirements for both a forward and a side approach....
Search Results "Forward Approach"
Commonly Searched Documents
-
III-7.5185 Automated teller machines
-
Accessible Counter Height
Accessible sales or services counters, or portions of them, must be no higher than 36 inches where either a parallel or forward approach is provided (904.4)....
-
Attachment J
48 inches that allows a forward or parallel approach by a person using a wheelchair. ...
-
Picnic Tables
Provide clear floor or ground space that is 30 inches by 48 inches (760 millimeters by 1,220 millimeters) at each wheelchair seating space, positioned to accommodate a forward approach to...
-
1011.2.1 Size and Location
on each usable side of the grill, fireplace, and woodstove Trash and recycling receptacles 36 inches (915 mm) by 48 inches (1220 mm) positioned for forward...
-
Clear Ground Space [1011.2]
Trash and recycling receptacles 36 by 48 inches positioned for a forward approach to the receptacle opening or 30 by 60 inches positioned for a parallel approach to the receptacle opening...
-
1011.2.1 Size and Location
Center the space on each usable side of the grill, fireplace, and woodstove Trash and recycling receptacles 36 inches (915 mm) by 48 inches (1220 mm) positioned for forward...
-
E. Restaurants and Concessions:
shall make alterations and additions to all dining counters so that at least five (5) percent of the seating and standing spaces at the counter provide a clear floor space positioned for a forward...
- Figure 404.2.4.1(e) Maneuvering Clearances at Manual Swinging Doors and Gates: Hinge Approach, Pull Side – Drawing from the U.S. Access Board
- Figure 404.2.4.1(f) Maneuvering Clearances at Manual Swinging Doors and Gates: Hinge Approach, Push Side – Drawing from the U.S. Access Board
- Figure 404.2.4.1(h) Maneuvering Clearances at Manual Swinging Doors and Gates: Latch Approach, Pull Side – Drawing from the U.S. Access Board
- Figure 404.2.4.1(j) Maneuvering Clearances at Manual Swinging Doors and Gates: Latch Approach, Push Side – Drawing from the U.S. Access Board
- Figure 404.2.4.1(d) Maneuvering Clearances at Manual Swinging Doors and Gates: Hinge Approach, Pull Side – Drawing from the U.S. Access Board
-
11B-806.2.3 Sleeping areas
The clear space shall be positioned for parallel approach to the side of the bed. [2010 ADA Standards] 806.2.3 Sleeping Areas....
-
Single-User Toilet Rooms: Side Transfer Space
Where doors can swing out, the minimum room depth is typically determined by the lavatory depth and door clearances for forward approaches; (turning space is usually available within these...
-
407.12 Reach Height
least one of each type of operable part of stationary ICT shall be at a height conforming to 407.12.2 or 407.12.3 according to its position established in 407.12.1 for a side reach or a forward...
-
Sleeping Areas: ADA Standard Section 806.2.3
The clear floor space shall be positioned for parallel approach to the side of the bed....
-
Clear Deck Space: ADA Standard Section 1009.2.3
The space shall be 36 inches (915 mm) wide minimum and shall extend forward 48 inches (1220 mm) minimum from a line located 12 inches (305 mm) behind the rear edge of the seat....
-
11B-1009.2.3 Clear deck space
The space shall be 36 inches (914 mm) wide minimum and shall extend forward 48 inches (1219 mm) minimum from a line located 12 inches (305 mm) behind the rear edge of the seat....
-
Clear Floor or Ground Space
The minimum clear floor or ground space on a composite structure may be positioned for a forward or parallel approach. It may overlap accessible routes and maneuvering spaces. ...
-
R404 Clear Spaces (Section-by-Section Analysis)
Clear spaces are permitted to include knee and toe clearance and to be positioned for either forward or parallel approach to an element, unless another requirement specifies otherwise....
- American Specialties Recessed Mounted Disposable Cartridge Soap Dispenser 5002
- Figure 404.2.4.1(k) Maneuvering Clearances at Manual Swinging Doors and Gates: Latch Approach, Push Side with Closer – Drawing from the U.S. Access Board
- Figure 404.2.4.1(i) Maneuvering Clearances at Manual Swinging Doors and Gates: Latch Approach, Pull Side with Closer – Drawing from the U.S. Access Board