California State Fire Marshal (CSFM) and Chicago (BFP) See approvals by model in Specifications and Ordering Information ADA/NFPA/UFC/ANSI compliant Complies with OSHA 29 Part 1910.165 Wall...
Search Results "Back Wall"
Filters
Commonly Searched Documents
-
TelCom Wheelock Wall Mount Chime - 24 VDC 15/75 on Axis Strobe Candela CH70-241575W-FR
-
11B-408.4.6 Car controls
Control panels shall be centered on a side wall....
-
Plan 4A: 13-Foot Wide Accessible Guest Room
spaces at fixtures and turning space overlap (section 603.2.2); • Turning space includes knee and toe clearance at lavatory (section 304.3); • Water closet clearance is 60 inches at back...
-
3.4 Cinemark at Macedonia, 8161 Macedonia Commons Blvd., Macedonia, Ohio
., Macedonia, Ohio - In Auditorium 1, the four (4) wheelchair spaces shall be relocated one row farther back in the auditorium from their current location....
-
R305.2.1 Perpendicular Curb Ramps
Where the ends of the bottom grade break are in front of the back of curb, detectable warning surfaces shall be placed at the back of curb. 2....
-
11B-809.10.8.3 Cabinets
The finished floor shall extend to the wall under the lavatory....
-
11B-607.4 Grab bars
Where separate grab bars are required on adjacent walls at a common mounting height, an L-shaped or U-shaped grab bar meeting the dimensional requirements of Section 11B-607.4.1 or 11B-607.4.2...
-
Grab Bars: ADA Standard Section 607.4
Section 607.4 covers the current ADA Standards for bathtub grab bars.
-
T206 Handrails, Stanchions, and Handholds
Large non-rail vehicles must generally provide stanchions or handholds on forward- and rear-facing seat backs....
-
Grab Bars: ADA Standard Section 604.8.2.3
Section 604.8.2.3 covers the current ADA Standards for grab bars in ambulatory accessible compartments.
-
Benches
If the bench is not located next to a wall, the bench must have back support that is 42 inches minimum in length and extends from a point 2 inches maximum above the seat to a point 18 inches...
-
Lowered section for bar
Back in the day they were allowed in existing conditions but now removed from the code....
-
11B-247.1.2.6 Reflecting pools
The edges of reflecting pools shall be protected by railings, walls, warning curbs or detectable warnings complying with Sections 11B-705.1.1 and 11B-705.1.2.6....
-
3.11 Tinseltown, 651 Medford Center, Medford, Oregon
3.11 Tinseltown 651 Medford Center, Medford, Oregon - In Auditorium 6, the four (4) wheelchair spaces shall be located one row further back in the auditorium from their current location...
-
11B-809.10.5.1 Clear floor space
Controls shall be located on the wall at the foot of the bathtub. The edge of the clear floor space shall be flush with the control wall surface....
-
3.10 Cinemark 22, 2600 West Avenue I, Lancaster, California
3.10 Cinemark 22 2600 West Avenue I, Lancaster, California - In Auditorium 10, the four (4) wheelchair spaces shall be located one row further back in the auditorium from their current...
-
3.8 Cinemark at Valley View, 6001 Canal Road, Valley View, Ohio
3.8 Cinemark at Valley View 6001 Canal Road, Valley View, Ohio - In Auditorium 15, the four (4) wheelchair spaces shall be relocated one row farther back in the auditorium from their...
-
11B-703.4.2 Location
Where there is no wall space at the latch side of a single door or at the right side of double doors, signs shall be located on the nearest adjacent wall....
-
Surface Hazards: ADA Standard Section 609.5
Section 609.5 covers the current ADA Standards for the surfaces of grab bars and adjacent surfaces.
-
11B-609.5 Surface hazards
Grab bars and any wall or other surfaces adjacent to grab bars shall be free of sharp or abrasive elements and shall have rounded edges....
-
11B-602.8 Depth
Wall- and post-mounted cantilevered drinking fountains shall be 18 inches (457 mm) minimum and 19 inches (483 mm) maximum in depth....
-
Willoughby Industries WODF-1WM Wall Mounted A.D.A. Stainless Steel Outdoor Drinking Fountain
Requires the Premium User plan or above. (Login or upgrade your account!) -
Bobrick Koala Kare Horizontal, Wall-Mounted Baby Changing Station KB200 Revit Model
Requires the Premium User plan or above. (Login or upgrade your account!) -
Inpro Corporation JointMaster® 806 Series Floor Expansion Joint Covers Floor to Wall
Requires the Premium User plan or above. (Login or upgrade your account!)
