Doors shall be located in the front partition or in the side wall or partition farthest from the water closet....
Search Results "Back Wall"
Filters
Commonly Searched Documents
-
11B-604.8.1.2 Doors
-
11B-604.8.2.3 Grab bars
A side-wall grab bar complying with Section 11B-604.5.1 shall be provided on both sides of the compartment....
-
Gamco Horizontal Wall-Mounted Baby Changing Station Cream - BCS-1
Description FDA approved blow-molded high-density, cream-color polyethylene with Microban® antimicrobial additive. Reinforced full-length steel-on-steel hinge mechanism, with...
-
Gamco Horizontal Wall-Mounted Baby Changing Station Grey - BCS-2
Description FDA approved blow-molded high-density, grey-color polyethylene with Microban® antimicrobial additive. Reinforced full-length steel-on-steel hinge mechanism, with...
-
Bobrick Two-Wall Toilet Compartment Grab Bar Peened B-5897.99
42" W x 54" D (107 x 137cm), 1-1/4" (32mm) dia., peened finish. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1/8" (3mm)...
-
Bobrick Two-Wall Toilet Compartment Grab Bar Peened B-6897.99
42" W x 54" D (107 x 137cm), 1-1/2" (38mm) dia., peened finish. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1/8" (3mm)...
-
Bobrick Koala Kare Horizontal, Wall-Mounted Baby Changing Station KB200
Constructed of polypropylene and a unibody steel chassis, this baby changing station supports 200 lbs with minimal deflection. The steel-on-steel hinge has greater resistance to wear...
-
Bobrick Koala Kare Oval, Wall Mounted Baby Changing Station KB208
Model Number: KB208 An array of color choice for this beautiful oval model will compliment your restroom decor. Constructed of high density polyethylene. Thesteel pivot rod...
-
ADAPTABLE
As part of the initial design and construction, for example, structural backing would be provided for the later installation of grab bars, base cabinets under kitchen sinks would be removable...
-
T303 Handrails, Stanchions, and Handholds
We received only one comment on the proposed technical requirements in the 2010 NPRM related to the cross section of seat-back handholds....
-
11B-608.10 Soap dish
Where a soap dish is provided, it shall be located on the control wall at 40 inches (1016 mm) maximum above the shower floor, and within the reach limits from the seat....
-
Detail View – Accessible Round Set-Up
Measure from the back of one chair to the back of the chair directly behind it. Chairs must be set with the front edge of the chair at the edge of the table....
-
11B-608.3 Grab bars
Where separate grab bars are required on adjacent walls at a common mounting height, an L-shaped or U-shaped grab bar meeting the dimensional requirements of Section 11B-608.3.2 or 11B-608.3.3...
-
11B-809.12 Electrical receptacles, controls and switches
Where receptacles are provided in a kitchen at a corner work surface, one receptacle shall be located 36 inches (915 mm) from either wall at the inside corner....
-
ASME: ADA Standard Section 105.2.2
Section 105.2.2 of the ADA Standards cover references to the American Society of Mechanical Engineers (ASME) standards.
-
Rail Station Signs: ADA Standard Section 810.6
This means that signs can be placed well out of reach of braille readers, even on parapet walls and on walls beyond barriers....
-
Grab Bars: ADA Standard Section 608.3
Section 608.3 covers the current ADA Standards for grab bars in shower compartments.
-
T207.4.2. Large vehicles
Handholds or stanchions shall be provided within large non-rail vehicles on all forward- and rear-facing seat backs located directly adjacent to the aisle....
-
Pressalit Care 3000 Adult Changing Table
Height adjustable, folding, wall-mounted, fully featured adult changing table for wheelchair users. Available exclusively in the US from MAX-Ability....
-
3.5 Gahanna Stoneridge Plaza Movies 16, 323 Stoneridge Lane, Gahanna, Ohio
3.5 Gahanna Stoneridge Plaza Movies 16, 323 Stoneridge Lane, Gahanna, Ohio - In Auditorium 3, the four (4) wheelchair spaces shall be relocated one row farther back in the auditorium...
-
Bobrick B-635 Klutch Mobile Device Holder
Wall mounted mobile device holder shall have a type 304 stainless steel front with satin finish. Back plate shall be type 304 stainless steel....
-
Inpro Corporation JointMaster® 300 Recessed Mount Floor Expansion Joint Covers Floor to Wall
Requires the Premium User plan or above. (Login or upgrade your account!) -
Willoughby Industries ETW-1445-BS-HC ADA Compliant Toilet for 45-degree Chase Wall
Requires the Premium User plan or above. (Login or upgrade your account!) -
Just Manufacturing Enviro Series Multi-Station Wall Hung Washup Trough Lavatory System Package
Requires the Premium User plan or above. (Login or upgrade your account!)
