Constructed of polypropylene and a unibody steel chassis, this baby changing station supports 200 lbs with minimal deflection. The steel-on-steel hinge has greater resistance to wear...
Search Results "Back Wall"
- Bobrick Koala Kare Horizontal, Wall-Mounted Baby Changing Station KB200
- Gamco Horizontal Wall-Mounted Baby Changing Station Grey - BCS-2
- Bobrick Two-Wall Toilet Compartment Grab Bar Peened B-5897.99
- Bobrick Koala Kare Oval, Wall Mounted Baby Changing Station KB208
- Gamco Horizontal Wall-Mounted Baby Changing Station Cream - BCS-1
-
11B-408.4.6 Car controls
Control panels shall be centered on a side wall....
-
11B-408.4.6 Car controls
Control panels shall be centered on a side wall....
-
3.11 Tinseltown, 651 Medford Center, Medford, Oregon
3.11 Tinseltown 651 Medford Center, Medford, Oregon - In Auditorium 6, the four (4) wheelchair spaces shall be located one row further back in the auditorium from their current location...
-
11B-809.10.6.3 Clearance
A clearance of 36 inches (914 mm) wide minimum by 48 inches (1219 mm) long minimum measured from the control wall shall be provided outside the shower as illustrated in Figure 11B-809.10.6.3...
-
3.10 Cinemark 22, 2600 West Avenue I, Lancaster, California
3.10 Cinemark 22 2600 West Avenue I, Lancaster, California - In Auditorium 10, the four (4) wheelchair spaces shall be located one row further back in the auditorium from their current...
-
3.8 Cinemark at Valley View, 6001 Canal Road, Valley View, Ohio
3.8 Cinemark at Valley View 6001 Canal Road, Valley View, Ohio - In Auditorium 15, the four (4) wheelchair spaces shall be relocated one row farther back in the auditorium from their...
-
11B-809.10.8.3 Cabinets
The finished floor shall extend to the wall under the lavatory....
-
11B-809.10.8.3 Cabinets
The finished floor shall extend to the wall under the lavatory....
-
Grab Bars: ADA Standard Section 604.8.2.3
Section 604.8.2.3 covers the current ADA Standards for grab bars in ambulatory accessible compartments.
-
Willoughby Industries WODF-1WM Wall Mounted A.D.A. Stainless Steel Outdoor Drinking Fountain
Requires the Premium User plan or above. (Login or upgrade your account!)
-
Bobrick Koala Kare Horizontal, Wall-Mounted Baby Changing Station KB200 Revit Model
Requires the Premium User plan or above. (Login or upgrade your account!)
-
Inpro Corporation JointMaster® 806 Series Floor Expansion Joint Covers Floor to Wall
Requires the Premium User plan or above. (Login or upgrade your account!)
-
Grab Bars: ADA Standard Section 607.4
Section 607.4 covers the current ADA Standards for bathtub grab bars.
-
11B-247.1.2.6 Reflecting pools
The edges of reflecting pools shall be protected by railings, walls, warning curbs or detectable warnings complying with Sections 11B-705.1.1 and 11B-705.1.2.6....
-
11B-247.1.2.6 Reflecting pools
The edges of reflecting pools shall be protected by railings, walls, warning curbs or detectable warnings complying with Sections 11B-705.1.1 and 11B-705.1.2.6....
-
11B-607.4 Grab bars
Where separate grab bars are required on adjacent walls at a common mounting height, an L-shaped or U-shaped grab bar meeting the dimensional requirements of Section 11B-607.4.1 or 11B-607.4.2...
-
11B-607.4 Grab bars
Where separate grab bars are required on adjacent walls at a common mounting height, an L-shaped or U-shaped grab bar meeting the dimensional requirements of Section 11B-607.4.1 or 11B-607.4.2...
-
Plan 4A: 13-Foot Wide Accessible Guest Room
spaces at fixtures and turning space overlap (section 603.2.2); • Turning space includes knee and toe clearance at lavatory (section 304.3); • Water closet clearance is 60 inches at back...
-
Detail View – Accessible Round Set-Up
Measure from the back of one chair to the back of the chair directly behind it. Chairs must be set with the front edge of the chair at the edge of the table....