Adult changing table height shall be adjustable from 17 inches (432 mm) above the floor or ground to 38 inches (965 mm) above the floor or ground, as measured to the top of the changing surface...
Search Results "Fire-Building Surface"
Filters
Commonly Searched Documents
-
11B-813.2.1.3 Height and operation
-
11B-707.6.3.2 Tactile symbols
Function key surfaces shall have tactile symbols as follows: Enter or Proceed key: raised circle; Clear or Correct key: raised left arrow; Cancel key: raised letter ex; Add Value key: raised...
-
11B-411.2.1.5.1 Size
Buttons shall have square shoulders, be 3/4 inch (19.1 mm) minimum in the smallest dimension and shall be raised 1/8 inch (3.2 mm) plus or minus 1/32 inch (0.8 mm) above the surrounding surface...
-
809.2.2 Turning Space
For example, in kitchens, 804.3.1 requires at least one work surface with clear floor space complying with 306 to be centered beneath....
-
Using Patient Lifts
Then the sling is attached to the lift so the staff person can move the individual to the examination surface....
-
Elevated Accessible Routes
narrowed width permitted for 24-inch (610 mm) length to accommodate features in the composite structure 12-inch (305 mm) rise maximum per ramp run Top of handrail gripping surfaces...
-
Play Tables
Play Tables Play tables are surfaces, boards, slabs, or counters that are created for play....
-
809.2.2 Turning Space
For example, in kitchens, 804.3.1 requires at least one work surface with clear floor space complying with 306 to be centered beneath....
-
809.2.2 Turning Space
For example, in kitchens, 804.3.1 requires at least one work surface with clear floor space complying with 306 to be centered beneath....
-
REFERENCES
., Proposed Surface Roughness Standard for Pathways used by Wheelchairs. Transportation Research Board 93nd Annual Meeting, 2014(14-4494). 5....
-
M301 Diagnostic Equipment Used by Patients in Supine, Prone, or Side-Lying Position; M302 Diagnostic Equipment Used by Patients in Seated Position
Except for the size of the transfer surface (see M301.2.2 and M302.2.2) and certain supports (see M301.3.2 for stirrups, and M302.3.2 for armrests), the technical criteria in these sections...
-
§ 38.95(b)(13) Handrails
The handrail shall have a cross-sectional diameter between 11/4 inches and 11/2 inches or shall provide an equivalent grasping surface, and have eased edges with corner radii of not less...
-
§ 38.125(b)(13) Handrails
The handrail shall have a cross-sectional diameter between 11/4 inches and 11/2 inches or shall provide an equivalent grasping surface, and have eased edges with corner radii of not less...
-
§ 38.83(b)(13) Handrails
Handrails shall have a cross-sectional diameter between 11/4 inches and 11/2 inches or shall provide an equivalent grasping surface, and have eased edges with corner radii of not less than...
-
11B-505.10.3 Bottom extension at stairs
Extension shall return to a wall, guard, or the landing surface, or shall be continuous to the handrail of an adjacent stair flight....
-
PHILLIP CHUOR
construction; plan review of architectural and structural requirements for solar systems such as photovoltaic and water heating systems; plan review of Wildlife Urban Interface (WUI) high fire...
-
Hager Companies Three Knuckle - Half Mortise Swing Clear Hinge AB7511
Description: - For square edge doors - ANSI A8221 - Non-rising removable pin with flush pin and plug - Reversible - For use in hospitals or other institutional type buildings...
-
Hager Companies Three Knuckle - Half Mortise Swing Clear Hinge AB7512
Description: - For beveled edge doors - ANSI A8221 - Non-rising removable pin with flush pin and plug - Reversible - For use in hospitals or other institutional type buildings...
-
Hager Companies Three Knuckle - Full Mortise Swing Clear Hinge AB7501
Description: - For square edge doors - ANSI A8121 - Non-rising removable pin with flush pin and plug - Reversible - For use in hospitals or other institutional type buildings...
-
Hager Companies Five Knuckle - Full Mortise Swing Clear Hinge BB1362
ANSI A5121 - For square edge doors - Non-rising removable pin with button tip and plug - Four ball bearings - Reversible - For use in hospitals or other institutional type buildings...
-
Hager Companies Five Knuckle - Half Mortise Swing Clear Hinge BB1265
ANSI A8221 - For beveled edge doors - Non-rising removable pin with button tip and plug - Four ball bearings - Reversible - For use in hospitals or other institutional type buildings...
-
Hager Companies Five Knuckle - Full Mortise Swing Clear Hinge BB1363
A5121 - For beveled edge doors - Non-rising removable pin with button tip and plugs - Four ball bearings - Reversible - For use in hospitals or other institutional type buildings...
-
Hager Companies Five Knuckle - Full Mortise Swing Clear Hinge BB1361
ANSI A5122 - For beveled edge doors - Non-rising removable pin with button tip and plug - Two ball bearings - Reversible - For use in hospitals or other institutional type buildings...
-
Hager Companies Five Knuckle - Half Mortise Swing Clear Hinge BB1264
ANSI A8221 - For square edge doors - Non-rising removable pin with button tip and plug - Four ball bearings - Reversible - For use in hospitals or other institutional type buildings...
