An alteration of an existing element, space, or area of a building or facility shall not impose a requirement for accessibility greater than required for new construction....
Search Results "Fire-Building Surface"
-
11B-202.3.2 Extent of application
-
FACILITY
[DSA-AC] All or any portion of buildings, structures, site improvements, elements, and pedestrian routes or vehicular ways located on a site....
-
11B-202.3.2 Extent of application
An alteration of an existing element, space, or area of a building or facility shall not impose a requirement for accessibility greater than required for new construction....
-
206.5.1 Entrances
Each entrance to a building or facility required to comply with 206.4 shall have at least one door, doorway, or gate complying with 404....
-
202.3.2 Extent of Application
An alteration of an existing element, space, or area of a building or facility shall not impose a requirement for accessibility greater than required for new construction....
-
106.5.65 Structural Frame
The columns and the girders, beams, and trusses having direct connections to the columns and all other members that are essential to the stability of the building or facility as a whole....
-
§ 36.406(a)(2)
(2) New construction and alterations subject to §§ 36.401 or 36.402 shall comply either with the 1991 Standards or with the 2010 Standards if the date when the last application for a building...
-
1.1.12 Validity
ETA Editor's Note Sections from California Building Code Chapter 1 not adopted by Division of the State Architect - Access Compliance (DSA-AC) omitted....
-
Who Will Provide the Assistance?
Specific Person(s) in the Office or the Building Who: Has special training or skills Is known to the person with the cognitive disability Anyone in the Office or...
-
11B-202.2 Additions
Each addition to an existing building or facility shall comply with the requirements for new construction and shall comply with 11B-202.4 _|Alterations; Path of Travel Requirements|_....
-
Scoping [4.1.3(4)]
Compliance is required where stairs are the only connection between two levels, such as between floors in buildings without elevators....
-
225 Storage
Self-service storage spaces complying with Table 225.3 shall not be required to be dispersed among buildings in a multi-building facility. New...
-
§100.201 Accessible
Accessible, when used with respect to the public and common use areas of a building containing covered multifamily dwellings, means that the public or common use areas of the building can...
-
1.1.12 Validity
ETA Editor's Note Sections from California Building Code Chapter 1 that are not adopted by the Division of the State Architect - Access Compliance (DSA-AC) have been omitted....
-
Section 201.1
Section 201.1 The basic scoping requirement requires all areas of newly designed and newly constructed buildings and facilities to be accessible....
-
11B-202.2 Additions
Each addition to an existing building or facility shall comply with the requirements for new construction and shall comply with 11B-202.4 _|Alterations; Path of Travel Requirements|_....
-
11B-202.2 Additions
Each addition to an existing building or facility shall comply with the requirements for new construction and shall comply with 11B-202.4. Advisory 11B-202.2 Additions....
-
1.1.12 Validity
ETA Editor's Note Sections from the California Building Code Chapter 1 that are not adopted by the Division of the State Architect - Access Compliance (DSA-AC) have been omitted....
-
11B-1009.3.1 Sloped entries
Exception: Where sloped entries are provided, the surfaces shall not be required to be slip resistant....
-
R407.9.2 Curb or Barrier
A curb or barrier shall be provided that prevents the passage of a 100 mm (4 in) diameter sphere, where any portion of the sphere is within 100 mm (4 in) of the finish surface....
-
T702.8 Contrast
Where provided, protective surfaces over signs shall have a non-glare finish....
-
M302.3.2 Armrests
Armrests on transfer sides are not permitted to obstruct access to the transfer surface. See M302.2.3 Exception....
-
11B-1009.3.1 Sloped entries
Exception: Where sloped entries are provided, the surfaces shall not be required to be slip resistant....
-
11B-705.1.2.1 Platform edges
Detectable warning surfaces at platform boarding edges shall be 24 inches (610 mm) wide and shall extend the full length of the public use areas of the platform....