Swinging hoistway doors shall open and close automatically and shall comply with 404, 407.3.2 and 408.3.2....
Search Results "Self-Closing Door"
Commonly Searched Documents
- 
    
  
  408.3.2 Swinging Doors
  
- 
    
  
  404.2.6 Doors in Series and Gates in Series
  404.2.6 Doors in Series and Gates in Series.... 
- 
    
  
  404 Doors, Doorways, and Gates
  404 Doors, Doorways, and Gates... 
- 
    
  
  4.17.5* DOORS
  Toilet stall doors shall comply with 4.13.... 
- 
    
  
  Are closet doors and pantry doors required to comply?
  Requirements for doors, doorways, and gates in §404 apply to those that provide “user passage” (§206.5). Doors serving walk-in closets or pantries must comply.... 
- 
    
  
  18.1 Q. Is it necessary to provide usable doors when the door leads to an area of the dwelling that is not accessible, such as the door leading down to an unfinished basement...?
  Within the dwelling unit, doors intended for user passage through the unit must meet the requirements for usable doors.... 
- 
    
  
  404.2.6 Doors in Series and Gates in Series
  The distance between two hinged or pivoted doors in series and gates in series shall be 48 inches (1220 mm) minimum plus the width of doors or gates swinging into the space.... 
- 
    
  
  225.2.1 Storage
  Commenters recommended that the Department adopt language requiring public accommodations to provide access to all self-service shelves and display areas available to customers.... 
- 
    
  
  F206.5 Doors, Doorways, and Gates
  Doors, doorways, and gates providing user passage shall be provided in accordance with F206.5.... 
- 
    
  
  206.5 Doors, Doorways, and Gates
  Doors, doorways, and gates providing user passage shall be provided in accordance with 206.5.... 
- 
    
  
  Doors, Doorways and Gates [§206.5 and §404]
  Doors, Doorways and Gates [§206.5 and §404] Compliance is required for doors, doorways, and gates providing user passage on accessible routes.... 
- 
    
  
  R218 Doors, Doorways, and Gates
  R218 Doors, Doorways, and Gates The SNPRM would revise R218 to read as follows: R218 Doors, Doorways, and Gates.... 
- Open Doors Organization (ODO)
- 
    
  
  404.2.7 Door and Gate Hardware
  Handles, pulls, latches, locks, and other operable parts on doors and gates shall comply with 309.4.... 
- 
    
  
  1010.2.2 Hardware
  Door handles, pulls, latches, locks and other operating devices on doors required to be accessible by Chapter 11A or 11B shall not require tight grasping, tight pinching or twisting of the... 
- 
    
  
  5. BENEFITS DISCUSSION
  For example, some people’s hearing or vision disability may not be such that they would need closed movie captioning or audio description. ... 
- Stanley Magic-Force™ Full or Low Energy Swing Door Operator
- 
    
  
  413.1.1 Caption Controls (Section-by-Section Analysis)
  Section-by-Section Analysis) This proposed section would require that, where video-capable hardware provides physical volume adjustment controls, such ICT must also have a control for closed... 
- 
    
  
  404.2.6 Doors in Series and Gates in Series
  The distance between two hinged or pivoted doors in series and gates in series shall be 48 inches (1220 mm) minimum plus the width of doors or gates swinging into the space.... 
- 
    
  
  Opening Force
  The closing force required by building codes usually exceeds 5 pounds, the maximum considered to be accessible.... 
- 
    
  
  11B-904.5.1 Self-service shelves and dispensing devices
  Self-service shelves and dispensing devices for tableware, dishware, condiments, food and beverages shall comply with Section 11B-308.... 
- Norton 5600 Series Low Energy Operator
- 
    
  
  11B-904.5.1 Self-service shelves and dispensing devices
  Self-service shelves and dispensing devices for tableware, dishware, condiments, food and beverages shall comply with Section 11B-308 _|Reach Ranges|_.... 
- 
    
  
  11B-904.5.1 Self-service shelves and dispensing devices
  Self-service shelves and dispensing devices for tableware, dishware, condiments, food and beverages shall comply with Section 11B-308 _|Reach Ranges|_.... 
